Magic Bullet MBF04 User Manual page 13

damage to the product or property.
•
Do not use the unit in an area
that is wet, or anywhere it could
become wet.
•
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
•
Do not attempt to plug the unit into
an electrical outlet with wet hands.
•
Do not use the cord, plug, or Motor
Base if it has been immersed in water
or other liquids. Any significant
spillage on, under, or around the
Motor Base should be cleaned and
dried before plugging in and using
the unit.
•
Do not modify the electrical cord
in any way.
•
Do not operate any unit with a
damaged electrical cord or plug.
The electrical cord and plug are not
suitable for replacement. If damaged,
the appliance must be replaced.
Contact Customer Service for
800-NBULLET
assistance at:
(800-6285538).
•
Do not allow or place the electrical
cord near or touching any hot
surfaces, heat source, or flame,
including the stove.
•
Do not allow the electrical cord
to hang over the edge of a table
or counter.
•
Do not pull, twist, or damage
the power cord.
•
Overloading the unit may overheat
the motor and engage the thermal
breaker. If the internal thermal
breaker shuts off the motor, unplug
the Motor Base and let it cool for
an hour before attempting to use it
again. The thermal breaker will reset
when the unit is unplugged and the
thermal breaker cools down.
•
UNPLUG
Always your magic bullet
Blender when it is not in use, and
when assembling, disassembling,
changing accessories, or cleaning.
•
NEVER
pull from the power cord to
unplug. To unplug, grasp the plug
and pull from the outlet.
24
•
Use of incompatible parts or
aftermarket parts may result in
damage to your magic bullet
Blender or create safety hazards
that may cause personal injury or
damage. When ordering replacement
parts, always use genuine magic
bullet parts and accessories
®
from nutribullet.mx or
contact Customer Service at:
800-NBULLET (800-6285538).
ventilation:
•
NEVER
obstruct the ventilation
openings on the bottom of the
Motor Base of your magic bullet
Blender. Openings on the bottom
of the Motor Base should be free of
dust and lint and never obstructed.
Obstructing the ventilation openings
may overheat the motor, presenting
a fire hazard that may cause
serious personal injury, death, or
property damage.
•
ALWAYS operate the magic bullet
Blender on a level surface, leaving
unobstructed space beneath and
around the Motor Base to permit
proper air circulation. Slots on
the bottom of the Motor Base are
provided for ventilation to ensure
reliable operation and to prevent the
motor from overheating.
•
NEVER
place your magic bullet
Blender on top of flammable
materials such as newspapers,
tablecloths, napkins, dishtowels,
place mats, or other similar materials.
medical safety:
•
Always consult your physician
regarding health and nutrition
concerns and advice. The information
contained in this User Guide are
®
not meant to replace the advice of
your physician.
•
ALWAYS follow recommended
maintenance and care instructions in
the User Guide. NEVER operate your
magic bullet
components. If your magic bullet
Blender malfunctions or is damaged
®
in any way, immediately discontinue
use and contact Customer Service at:
800-NBULLET
have any comments, questions, or
concerns, please go to
or call Customer Service.
!
Save these
instructions!
®
®
®
Blender with damaged
®
®
(800-6285538). If you
nutribullet.mx
25