Installing Drivers Onto Your Windows Nt 4.0(Sp3) - PROLiNK Pixelview MVGA-NVTNT2A User Manual

CHAPTER 3
Installing drivers onto your Windows NT 4.0 (SP3)
1. Start Windows NT, switch display properties to VGA mode (16 colors,
640x480 pixels), then restart your computer to make the change.
2. After your computer restarts, right-click the desktop and click
"Pr oper ties".
3. Click the "Settings" tab.
4. Select "Display Type".
5. Select Adapter Type and click "Change"
6. Click "Have Disk".
7. Insert the AutoRun driver into the CD-ROM drive.
8. Click (assuming your CD-ROM disc driver X) "Br owse CD" to select
the path X:\NVTNT2\NT4.0 of the display driver for Windows NT.
9. You will see a list of NVTNT2 Series driver. Select NT4.0 driver and
then click "OK".
10 Windows NT will once again prompt for confirmation. All appropriate
files are then copied to the hard disk. When all files are copied, go back to
the "Display Pr oper ties" box by clicking "Close". Click "Apply".
11 The "System Setting Change" dialog box is displayed. Click "Yes" to
restart Windows.
12 Windows NT will restart with the default settings. The display applet will
appear to allow for mode selection.
7
SOFTWARE INSTALL