Equipment Checklist; Package Contents; Optional Rack-Mounting Equipment - SMC Networks 6726AL2 - annexe 1 Installation Manual

Equipment Checklist

After unpacking this switch, check the contents to be sure you have
received all the components. Then, before beginning the installation, be
sure you have all other necessary installation equipment.

Package Contents

• TigerSwitch 10/100, SMC6726AL2
• Four adhesive foot pads
• Bracket Mounting Kit containing two brackets and eight screws for
attaching the brackets to the switch
• Power Cord—either US, Continental Europe or UK
• RS-232 console cable
• This Installation Guide
• Management Guide
• SMC Warranty Registration Card—be sure to complete and return to
SMC

Optional Rack-Mounting Equipment

If you plan to rack-mount the switch, be sure to have the following
equipment available:
• Four mounting screws for each device you plan to install in a
rack—these are not included
• A screwdriver (Phillips or flathead, depending on the type of screws
used)
E C
QUIPMENT HECKLIST
3-3