TTS Bee-Bot User Manual page 5

When pressed, the Bee-Bot is instructed to move in the direction indicated on the button.
Forward Button
Backward Button
Right Turn Button
Left Turn Button
Things to note:
• If you press any of the direction buttons or pause button more than once in succession,
Bee-Bot will execute that command for each press. For example, if you press the forward
button twice, followed by the green 'Go' button, Bee-Bot will move forward 15cm,
followed by another 15cm forward.
• To move Bee-Bot to the right or left, remember to add a forward or backward step, after
the turn step. For example, pressing the 'right turn' button, followed by the 'forward'
button, then the 'Go' button, will instruct Bee-Bot to turn 90 degrees to the right then
move forward 15cm.
• Bee-Bot is pre-programmed to always move in 15cm steps.
The Blue Buttons:
Pause Button
Delete Button
Each press of an orange direction button or pause button adds that command to Bee-Bot's
memory, and when the 'Go' button is pressed, Bee-Bot executes all stored commands in
sequence.
Press the forward button and Bee-Bot will be instructed
to move 15cm forwards.
Press the backward button and Bee-Bot will be instructed
to move 15cm backwards.
Press the right turn button and Bee-Bot will turn 90
degrees to the right.
Press the left turn button and Bee-Bot will turn 90
degrees to the left.
Pressing the pause button will instruct Bee-Bot to pause for 1
second during a sequence of commands.
Pressing the delete button will delete all the steps so a new
sequence can be programmed.