TTS Bee-Bot User Manual page 3

Low Power Sleep Mode
• If Bee-Bot is unused for 2 minutes with the sensor switch turned 'OFF', Bee-Bot will make
a sound and go into sleep mode.
• If you do not have a sensor switch on your Bee-Bot, it will also go into sleep mode after 2
minutes.
• If Bee-Bot is unused for 4 minutes with the sensor switch turned 'ON', Bee-Bot will make
a sound and go into sleep mode.
•
Pressing any of Bee-Bot's buttons will wake Bee-Bot from sleep mode. It will make a
sound and flash its eyes.
How to switch Bee-Bot on
SOUND Switch
SENSOR Switch
As the diagram shows, there are three switches located underneath Bee-Bot:
• a power slide switch
• a sound slide switch
• a sensor slide switch.
Please Note: If you have an older version of Bee-Bot (pre-2019), it will not have a sensor slide
switch.
• A switch is turned on if it is next to the 'I' symbol on the underneath of the Bee-Bot.
• A switch is turned off if it is next to the 'o' symbol on the underneath of the Bee-Bot.
Please Note: Older models of Bee-Bot may have 'on' and 'off' written above the power slide
switch and sound slide switch, rather than the 'I' and 'o' symbol.
POWER Switch