Haztec 3-3751 RM Series Quick Start Manual

3-3751-XX-RM
ELP LED Beacon
Thank you for purchasing this Haztec product. Before proceeding with installation it is essential
to read and understand this instruction booklet.
▪ Regularly inspect the product to confirm correct operation
▪ DO NOT stare directly into the light it produces as permanent damage to the eyes
may result
▪ Use only a mixture of soap and water to clean this product
▪ DO NOT direct a high-pressure water jet at this product
▪ DO NOT allow solvents, fuels, or acetone-based cleaners etc. to contact this product
Basic Operating Specifications:
Supply voltage range:
Maximum current draw:
LED power:
Operating temperature range:
Charging voltage:
Fuse rating:
Full charge from depleted:
Operating time Mode 1:
Operating time Mode 2:
Speed rating:
1
Charging must only take place when the battery has reached room temperature
2
Time is estimated from when the product is new. A fully charged battery at room
temperature is not a guarantee of operating time. Environmental conditions and usage will
affect the operating time
M103.1.4
10-30VDC
3A @ 12.5Vrms
3W per LED
O
-30 C to +55
12.6V
5A
4 hours
5 hours
9 hours
180 km/h / 105 mph
Haztec International Ltd ∙ Moorfield Road ∙ Leeds ∙ LS19 7BN ∙ UK
T: +44(0)113 202 9115 ∙ info@haztec.uk ∙ www.haztec.uk
▪ Extra-low profile LED beacon
▪ Clear-optic lens
▪ Choice of LED and lens colour
▪ Rechargeable internal battery
▪ User-selectable flash patterns
▪ DIM mode
▪ Locked mode
▪ R65 versions available
O
C
1
2
2
- 1 -