Controls And Connection Ports - VDO PN 4000 User Manual

Controls and connection ports

1
Top
1 Power button
• Briefly press the power button to switch the navigation system to stand-by mode
• Briefly press the button a second time to turn the system on again
• Press and hold the button for approx. 3 seconds to turn off the navigation system
• To turn the device back on again, press and hold the button for approx. 3 seconds.
The navigation system will be completely restarted.
2 Light sensor: This sensor automatically adapts the brightness of the screen according to
the surrounding light. This function can be activated/deactivated in the Settings menu.
4
5
Front
3 Display/touchscreen
4 Charging symbol. This status LED displays the following:
Green The device is being powered by an external supply and
battery is charged to at least 95% of total capacity.
Red The device is being powered by an external supply and
the battery is being charged.
Orange The device is being powered by an external supply and no battery is inserted.
Off The device is not being powered by an external supply.
5 Infrared sensor
This can be used in conjunction with
an RCS 5100 steering wheel remote control (accessory)
2
3
57