VDO PN 4000 User Manual page 43

94
Operation and control
The motion bar in the top right of the screen above
the date and time indicates that the device is scan-
ning for channels.
The button below the date and time
allows you to adjust the volume.
Tap the [+] button to increase the
volume and the [–] to decrease the
volume.
If a channel is found, the Channel bar at the top of
the screen displays the name of the channel that is
found, e.g. "VOX". Below the channel name, the
signal strength or reception quality is displayed.
You can use the Up (left) and Down
(right) arrow buttons around the chan-
nel name to scroll up and down through
your saved channel list to select the
channel you require.
The programme bar at the bottom of the screen displays the name of the current
programme and the start and end times (= start of the next program).
The Back (left) and Forward (right) buttons allow you to scroll backwards and
forwards through the programme listings for the chosen channel. This does not
change the channel. The channel is only changed once you tap on the listed pro-
gramme.
The buttons on the left of the screen allow you to call up the following submenus:
System settings
Tapping the Settings button allows you to make various system settings.
Channel and programme selection (EPG)
The EPG button allows you to change the channel and the programme.
This displays an overview of channels and current programmes.
Teletext
When a channel is active you can also view the teletext pages for that channel.
Tap the Teletext button. To open a Teletext page, tap on the screen to call up
the numbers keyboard. Enter the required page number on the screen to bring
up the page.
DVB-T television