■
Start-up characteristics
If the vehicle has been parked for some time, the satellites will have continued on
their orbits. As a result, once the ignition has been switched on, it may take several
minutes before a sufficient number of satellites are being received and the system can
start analysing their signals. Sufficient reception (three-dimensional position) is
indicated by the satellite symbol Ù in the display in the selected text colour. The
satellite symbol remains red if GPS reception is inadequate.
During the start-up process, the navigation system may report the message: "Please
proceed to the planned route". The system assumes that the vehicle is located off a
stored road. If other roads exist in this area, the navigation system may issue incorrect
messages. The system assumes that the vehicle is located on a different road.
■
Automatic route re-calculation
If you do not follow the instructions of the system, the system will automatically plan a
new route.
■
Areas with limited road information
In some areas, not all of the information on a road is available in the selected
navigation database. Thus, for example, turn-off prohibitions, information on the
direction of travel in a one-way street or prohibited entry into a pedestrian zone may
be missing. The navigation system will display a warning if you drive into such an area.
✎
Information concerning the functions of the navigation system can be found on the
internet at www.vdodayton.com.
Maintenance and care
Do not clean using cleaning fluid, alcohol or other solvents. A damp cloth is best
suited.
General information
5
Need help?
Do you have a question about the MS 5200 and is the answer not in the manual?
Questions and answers