VDO MS 5200 Owner's Manual page 22

Audible messages
As soon as guidance is activated, acoustic routing information is provided in addition
to the symbols on the guidance screens.
■
You didn't hear the information?
☞
Press the VOICE button on the remote control.
:
The last direction is repeated and/or updated driving directions are provided.
✎
If the symbol l flashes in the status line, the audible information is switched off.
Press the V or W button on the remote control to activate the information again.
Planning an alternative route
During guidance it is possible for the navigation system to plan an alternative route to
cover a distance which you can select. Use this function, e.g. if you wish to avoid
stationary traffic, or if you do not agree with the current routing. The alternative
route will be calculated for the specified distance from the vehicle's current location.
☞
Press ALT-R.
:
The system now displays the distance for which the alternative route is to be
planned. This can be set from 1 to 50 km.
☞
Select the value after "Distance:" and press the OK key.
☞
Set the value using the cursor buttons and press the OK button.
☞
Select the option "Yes" if you want to transfer the entered value and start the
planning of the alternative route.
✎
Select "No" if you want to cancel the planning of an alternative route.
Screen displays
Four types of screen display are available for guidance:
❑ Symbols: Graphic display of the "turn-now" advice
❑ Map: Map display of the planned route. The arrow shows the current vehicle
position
and the combination of both display types (split screen):
❑ Map / symbols
❑ Map / trip computer
■
Switching display type
☞
By pressing the NAVIGATION button, you can switch between the various display
types:
Navigation
21
k