Safety; Removable Operating Panel; Security Code; Anti-Theft Protection Led - VDO MS 4200 RS Owner's Manual

SAFETY

The system has the following safety functions to prevent theft:

Removable operating panel

Take the removable operating panel with you, whenever you leave the vehicle. Keep
the panel in its protective case. Always replace the operating panel before driving off.
When the front is opened, acoustic signals will sound (independent of the presence of
the removable operating panel).
Removing the operating panel
1. Open the front by pressing the release button.
2. Pull the operating panel from its metal bracket.
3. Push the metal bracket back up.
Re-inserting control panel
1. Insert the operating panel with the right or the left side first.
2. Push the operating panel until it snaps into place.
To ensure a good connection between the device and the operating panel we
recommend that you clean the contacts occasionally with a cotton swab.

Security code

The navigation radio can be protected against theft with a security code. The unit is
disabled as soon as it is disconnected from the voltage supply (e.g. if it is stolen). It can
only be reactivated by entering the correct code.
The security code can be activated/deactivated and changed. For further information
see "INITIALISATION", option "Security Code"

Anti-theft protection LED

When the navigation radio is switched off and the ignition key removed, a red
anti-theft LED will flash on the front of the unit if the operating panel is removed.
The anti-theft LED is linked to the security code. It will not flash if the security code
has been deactivated.

Safety sticker

Affix the safety stickers provided to the vehicle windows so that they are clearly
visible.
CAUTION:
A
For reasons of safety please ensure that the removable operating panel is always
flipped up (closed) when driving.
20
page 40.