Subscribe to Our Youtube Channel
Related Manuals for Woxcon SUH2E-8K
Summary of Contents for Woxcon SUH2E-8K
- Page 1 User Manual SUH2E-8K HDMI V2.1 1x2 Splitter with Down-scaling All Rights Reserved Version: SUH2E-8K_2024V1.6...
-
Page 2: Safety Precaution
HDMI V2.1 1x2 Splitter with Down-scaling Statement Thanks for purchasing this product, please read this user manual carefully before using this product. The functions described in this version are updated till January 23, 2024. In the constant effort to improve our product, we reserve the right to make functions or parameters changes without notice or obligation. -
Page 3: Table Of Contents
HDMI V2.1 1x2 Splitter with Down-scaling Table of Contents Product Introduction ....................1 Features ........................1 Panel Description ....................2 4.1 Front Panel ......................2 4.2 Rear Panel ......................3 DIP Switch Operation ....................3 5.1 EDID Management ..................... 3 5.2 HDCP Mode ....................... -
Page 4: Product Introduction
Supports ALLM, VRR and audio de-embedding Supports CEC pass-through. Provides LEDs to indicate the current operating status. Firmware upgrade by USB-C port. 3. Packing List 1x SUH2E-8K 4x Rubber feet 1x Power Adapter (12V DC 1A) 1x Mount Kit (Optional) 1x User Manual Note: Please contact your distributor immediately if any damage or defect in the components is found. -
Page 5: Panel Description
HDMI V2.1 1x2 Splitter with Down-scaling 4. Panel Description 4.1 Front Panel ① POWER LED: The LED illuminates green when power is applied. ② INPUT and OUTPUT LEDS: Input LED: The LED illuminates blue when the HDMI input signal is connected and HDCP is connected, flashing when the HDMI input signal without HDCP, light off when there is no input signal. -
Page 6: Rear Panel
HDMI V2.1 1x2 Splitter with Down-scaling 4.2 Rear Panel ① INPUT: Type-A female HDMI input port to connect a HDMI source. ② OUTPUTS: Two type-A female HDMI output ports to connect HDMI displays. ③ DC 12V: DC port to connect DC power adapter. 5. - Page 7 HDMI V2.1 1x2 Splitter with Down-scaling Switch Status Video Resolution Audio Format Obtain the EDID of output 1-2, then combine EDIDs and output the best compatible EDID. Priority the EDID of output 1. 4K@60Hz 4:4:4 HDR DTS/Dolby 4K@120Hz 4:2:0 HDR LPCM 4K@120Hz 4:4:4 HDR DTS/Dolby...
-
Page 8: Hdcp Mode
HDMI V2.1 1x2 Splitter with Down-scaling 5.2 HDCP Mode Put switch 4 on “ON” position to select HDCP Active mode, or to “OFF” for HDCP Passive mode. Switch Status Mode HDCP Passive OFF (0) Automatically follows the Display’s HDCP version. (Default) Inform the source that displays don’t support HDCP and ON (1) -
Page 9: Technical Specification
HDMI V2.1 1x2 Splitter with Down-scaling 7. Technical Specification Video Input Input (1) HDMI Input Connector (1) Type-A female HDMI HDMI Input Resolution Up to 8K@60Hz 4:4:4 8bit HDMI Standard HDCP Version 2.3, 2.2, 1.4 compliant Supported Video Output Output (2) HDMI Output Connector (2) Type-A female HDMI... -
Page 10: System Connection
HDMI V2.1 1x2 Splitter with Down-scaling 8. System Connection The following diagram illustrates the typical input and output connection of the splitter: Note: When connecting, there may be over-edge problems. At this time, you need to set over-scanning in the graphics card settings. - Page 11 HDMI V2.1 1x2 Splitter with Down-scaling...
-
Page 12: Command
HDMI V2.1 1x2 Splitter with Down-scaling 9. Command Baud rate: 115200 Data bit: 8 Stop bit: 1 Parity bit: none Note: The commands need to be ended with <CR><LF> Command Description Example and Feedback >EDIDUpgrade <Please Upload the EDID File Through RS232 In 10s …...
Need help?
Do you have a question about the SUH2E-8K and is the answer not in the manual?
Questions and answers