Mounting; Metal Sleeve; Car Radio - VDO CD 4402 User Manual

Wired Remote Control
Use the Pins 8 & 9 to connect remote control
accessories.
c-Blue Connector C3
Cable used for separately available CD chan-
ger (see Fig.6).
Note : The set only accept CD changer and
DAB box with digital output (see CD changer
installation).
Connector D
These specific set connectors
belong to accessories sold
separately (see your dealer)
a-Connector D1
This connector is used to connect your tele-
phone to the set (see Fig.7)
Telephone In
Use these inputs (Pins 12 & 14) to connect the
audio output from your mobile phone for
amplifying the sound through the speakers.
Telephone supply
Use this Pin 13 to connect your car kit and
have a permanent supply for it.
Telephone Mute
Use this input (Pin 15) to connect your tele-
phone.
Note : Before using your telephone, set the
phone system and configure its appropriate
detection level in the Main Menu.
Telephone Remote
Use this input (Pin 16) to connect your remote
telephone accessory which activate or not the
radio car kit (radio On/Off).
b-Connector D2
This connector is used to connect the audio
interface for external equipments as naviga-
tion system, subwoofer and traffic messages
channel (see Fig.8).
4
Navigation Interface
Use the Navigation interfaces (Pins 21 & 25)
to transmit TMC data to your VDO-DAYTON
Navigation system.
Output Subwoofer Amplifier
Use these interfaces (Pins 22 & 23) to connect
a subwoofer amplifier.
Note : Before using the subwoofer, you need
to switch it ON and select its low frequency
threshold in the Sound Init Menu, and adjust
its volume in the Sound Menu.
Audio In
Use these inputs (Pins 24, 27 & 28) to connect
others auxiliary audio equipments.
Navigation mute
Use this input (Pin 26) to connect your navi-
gation system.
Note : Before using your navigation system,
you need to set the navigation system and to
configure its appropriate detection level in the
Main Menu.

MOUNTING

METAL SLEEVE

1- Insert the metal sleeve in the opening
(182x53mm) of the car dashboard or con-
sole (See Installation card, Fig.11).
For CD Player optimal performance, the
metal sleeve must be positioned within
limits shown: angle between 0° to +20°.
2- Fix the sleeve by pushing the metal tags
outwards with a screwdriver (see Fig.11).

CAR RADIO

Connecting the radio
(See Fig.9 and Fig.10)
1- Check that the battery is disconnected.