Table of Contents
Advertisement
SCAN TRACK
The scan function enables you to listen to the
first few seconds of each track.
• Press
to activate/deactivate Scan track.
• Press
or
to start the scanning.
Note : You can select how many seconds each
track is scanned, see 'SAM' (page 14); option
'SCANTIME'.
RANDOM TRACK PLAYBACK
• Press
for more than 2 seconds to
activate/deactivate Random track playback.
REPEAT TRACK
To continually repeat the current track.
• Press
for more than 2 seconds to
activate/deactivate Repeat current track.
DISC EJECT (CD PLAYER) (See page 3, figure
E)
• Flip down the front and press EJECT to remove
the CD from the player.
SWITCHING THE DISPLAY MODE (CD)
• Press
once or repeatedly to switch
the display between track number/elapsed play
time, total track time, background station name
or frequency and sound style.
SWITCHING THE DISPLAY MODE (CD
CHANGER)
• Press
once or repeatedly to switch
the display between track number/elapsed play
time, disc number/total track time, background
station name or frequency and sound style.
* Depending on version
SPECIAL FUNCTIONS
Setting the clock (manually)
• See 'SAM' (page 14), option 'CLOCKSET' .
Note :
You can select 12 hour or 24 hour clock display.
• See 'SAM' (page 14), option 'CLOCK' .
RDS clock (auto update)
You can select an automatic update of the clock
via the RDS radio signal.
• See 'SAM' (page 14), option 'CLOCK' .
– The transmitted time via RDS can be incorrect.
SDVC (Speed Dependent Volume Control)*
See 'INSTALLATION' (page 5) for connection
instructions.
To compensate for surrounding noise, this
function automatically increases the volume of
the set with respect to the car's speed. Four
compensation levels can be selected. Level 1
gives a small increase while level 4 gives a greater
increase. See 'SAM' (page 14) option 'SDVC' to
select the level until you find one which suits your
car.
To calibrate :
To avoid unnecessary distraction we advise
that this procedure is carried out with the
help of somebody else.
1 While stationary, hold down the 'SAM' key and
turn on the set.
2 The set mutes.
Display shows 'RECALIB' and
'50KM/H' (30 MPH) alternately.
3 Now drive to 50KM/H (30 MPH).
Always obey the highway code and current
traffic restrictions and conditions!)
4 Once 50KM/H (30 MPH) is reached, press
or
key.
You hear a beep and display shows 'CALIB
OK'.
5 Now turn the set off and then on again to return
to normal operation. Level 2 is chosen for SDVC
in 'SAM'.
13
Hide quick links:
Advertisement
Table of Contents
