CHEF IQ iQ Sense CHEF PROBE-V3 User Manual page 7

3. Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician
for help.
To satisfy RF exposure requirements, a separation distance of
20cm or more should be maintained between the antenna of this
device and persons during device operation. To ensure compliance,
operation at closer than this distance is not recommended.
ISED REGULATORY COMPLIANCE
This device contains license-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Develop-
ment Canada's license-exempt RSS(s). Operation is subject to
the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including inter-
ference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d'Innovation, Sciences
et Développement économique Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes :
1. L'appareil ne doit pas produire de brouillage.
2. L'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en comprom-
ettre le fonctionnement.
This equipment complies with IC RSS-102 radiation exposure
limits set forth for an uncontrolled environment. This equip-
ment should be installed and operated with minimum distance
20 cm between the radiator and your body.
Cet équipement est conforme aux limites d'exposition aux
radiations IC CNR-102 établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec une
distance minimale de 20 cm entre le radiateur et votre corps.
BEFORE FIRST USE
For best results, follow these steps before using your chefiqlo Sense
for the first time. Note that the hub and probe(s) must be
paired with the free chefiqlo App in order to work.
1. Remove all packaging materials and check to ensure that
all parts are accounted for.
2. Carefully wipe the probe(s) down with a damp cloth to
remove any packing debris.
3. Charge the hub and the probe(s). Plug the smaller end
of the USB cord (included) into the charging port on the
hub. Plug the other end into a USB charger, such as a wall
charger (not included). If using a wall charger, be sure it's
plugged into an electric socket. The ON button will light up.
If the button is red or blinking red, it means the hub's
charge is very low. During charging, the button will blink
green; it will turn solid green when the hub is fully charged.
The hub requires about 3 hours to fully charge and will
sustain its charge for at least 20 hours of active use. When
turned off, the hub will keep its charge for up to 1 year.
4. Press the probe(s) into the nest on the hub to charge them.
Be sure they're securely nestled. A probe requires about
20 minutes to fully charge and will sustain its charge for up
to 40 hours of active use. (However, after just 1 minute of
charging, you can use a probe and it will work for hours.)
5. While the hub and probe(s) are charging, download the
chefiqlo App from the App Store or Google Play (if you
don't already have it).
6. Pair your hub and probe(s) as directed on the app to set
up and activate your new thermometer.
COOKING WITH THE chefiqlo SENSE
The chefiqlo Sense makes cooking food to the perfect
doneness easy. Using the free chefiqlo App, you can either set the
thermometer manually to the desired temperature or follow one
of our Guided Cooking recipes, which provide you with directions
based on the internal temperature of the specific food you're
cooking. You can also take advantage of our presets to benefit
from hundreds of hours of testing by our culinary team. Simply
input the type of food you want to cook, and this guide will suggest
the method, temperature, time (and more!) to ensure perfectly
cooked food. For best results, follow these steps:
7