STANDARD * understand this manual. Model Lamps Current Power Length Personnel must be trained prior to operating Amps Watts HQ450E this appliance. HQ900E This product is suitable for commercial use only. HQ1200E 1050 1200 HQ1500E 1400 1500 This machine should not be operated by...
This machine contains no user-serviceable parts. vibration or motion can occur. Warranty does Roband Australia, one of our agents, or a not cover globe failures including failure caused similarly qualified person(s) should carry out by vibration or motion. Before moving the heat repairs.
Page 4
STEP 2, separately through a Roband supplier. As Remove mounting plates ventilation is most important to dissipate heat, from Heat lamp, position the units should not be fully “boxed in”.
GLOBE INSTALLATION STEP 6, Snap the lamp cover back in place Lamp Replacement and Installation STEP 1, Turn the unit off, unplug the machine and allow to STEP 7, cool to room temp before replacing lamps. If the Repeat process for remaining lamps. unit is a fixed appliance, HUQ, ensure the power is disconnected.
Tubular Heating Elements is not a warranty fault. Roband or any subsidiary company or Agent shall not be liable for loss of profit or damage to other equipment and property except where it is in breach of the guarantees provided in accordance with applicable legislation.
Need help?
Do you have a question about the HQ450E and is the answer not in the manual?
Questions and answers