Important Safety Information Do not install this equipment in a confined or built-in space such as a bookcase or similar unit, and keep well ventilated in an open space. The ventilation should not be impeded by covering the ventilation openings with items such as newspaper, tablecloths, curtains etc.
Page 3
Important Safety Information FCC Statement This equipment has been tested and found to comply with the limits for a Class B The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). digital device, pursuant to part 15 of the FCC Rules. These limits are designed to This device meets the exemption from the routine evaluation limits in section 2.5 of provide reasonable protection against harmful interference in a residential RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian...
Page 4
Contents Audiolab 9000P 1. Getting Started 2. Controls and Functions 3. Connections 4. System Operations 5. System Connection 6. Warranty Coverage 7. Specifications...
The unit must be mounted on a solid, level and stable surface. • Class AB power amplifier Before you connect the Audiolab 9000P to the AC mains power, ensure your AC • CFB (Complementary Feedback) Technology mains voltage corresponds to the rating on the rear panel of the product. If in •...
Power Switch POWER OUTPUT Made in China RIGHT LEFT Mains Input LINE TRIG Stereo/bridge STEREO BRIDGE (mono) Mode Switch AMPLIFIER MODEL: 9000P RIGHT LEFT LINE AC 220-240V~50/60Hz 660W BRIDGE INPUT=LEFT FUSE T3.15AL 250V LINE/XLR Switch 12V Trigger XLR Input Line Input...
Page 7
"3.5 to 3.5mm" jack interconnects (not include). Mains Input Before connecting the AC power cord to the 9000P, please make sure the Power Switch is in the OFF position. Switch it to the ON position after connecting the unit to the AC mains.
Protection Mode The Audiolab 9000P is protected by a thermal switch which interrupts the AC power supply if the amplifier is grossly overloaded for a period of time. In case of activation of the ‘protection mode’ the power indicator LED flashes to indicated that the unit is in ‘protection mode’. To restore operation, simply press the standby button on the front panel.
Page 09 5: System Connection Stereomode with a Preamplifier (Audiolab 9000Q as the Example) The STEREO/BRIDGE selector switch should be 'OUT' for the Stereo Power Amplifier mode. RIGHT LEFT LOUDSPEAKER LOUDSPEAKER POWER PRE AMPLIFIER MODEL: 9000Q INPUT INPUT RIGHT LEFT...
Page 10
Page 10 5: System Connection Bridge (Mono) Mode (with 2 x 9000P and 9000Q Preamplifier for the example). The STEREO/BRIDGE selector switch should be 'IN' for the Bridge (Mono) mode. RIGHT LEFT LOUDSPEAKER LOUDSPEAKER POWER PRE AMPLIFIER MODEL: 9000Q INPUT...
6: Warranty Coverage Page 11 Audiolab warrants this product, subject to the terms and conditions below, to be This warranty provides benefits that are additional to and do not affect your free from defects in materials and workmanship. During the warranty period statutory consumer rights.
Page 12
Other than the warranty and services set out in this warranty, to the fullest extent war, riot, public disturbance. permitted by law, Audiolab shall not be liable to you and/or any third party or entity Any other causes beyond the reasonable control of either Audiolab and its whatsoever for: Authorised Distributor.
Page 13 7: Specifications BRAND Audiolab Model 9000P General Description Power Amplifier Design Philosophy and Core Technology Class AB power amplifier Stereo/Bridge (Mono) Modes Inputs 1 x Analogue, 1 x XLR, 1 x 12V Trigger Outputs 1 x Stereo Speaker Power Amplifier Section(STEREO)
Need help?
Do you have a question about the 9000P and is the answer not in the manual?
Questions and answers