Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for PTZ Optics Studio 4K
Summary of Contents for PTZ Optics Studio 4K
-
Page 2: Packing List
We are thrilled to have you join our community and look forward to delivering an exceptional experience! Packing List Please make sure the items below are included in the box: • Studio 4K • AC Power Supply • Quick Start Guide • IR Remote •... - Page 3 Precautions Do not subject the camera to rain or moisture. Do not remove the cover. Removal of the cover will void the camera’s warranty and may cause an electric shock. For any abnormal operation, please contact https:/ /community. ptzoptics.com/s/. Never operate outside of the specified operating temperature range or humidity.
-
Page 4: Warranty
Warranty PTZOptics includes a limited parts & labor warranty for all PTZOptics manufactured cameras. The warranty is valid only if PTZOptics receives proper notice of such defects during the warranty period. PTZOptics, at its option, will repair or replace products that prove to be defective. PTZOptics manufactures its hardware products from parts and components that are new or equivalent to new in accordance with industry-standard practices. -
Page 5: Starting The Camera
When the sequence is complete, the camera will stop and return to the home position. You can change the final position by setting preset 0. Cat 6 Cat 6 Studio 4K PoE Switch Router... - Page 6 Connections USB 3.0 Standby 10.) DC 12V Power RS485 Connection 11.) Power 3.5mm Input 3.5mm Output HDMI 3G-SDI USB Service Port Note: You can send video out using the following connections: SDI, HDMI, USB, or LAN. Simultaneous Output combinations: HDMI or SDI + IP + RTMP + NDI HDMI or SDI + USB HDMI or SDI + IP + USB...
- Page 8 IR Remote Control...
- Page 9 1. Standby Button Press this button to enter standby mode. Press it again to enter normal mode. Note: Power consumption in standby mode is approximately half of the normal mode. 2. Number Keys Press to set or call preset camera position or input a number. 3.
- Page 10 Note: If there is light behind the subject, they may appear darker. In this case, use Backlight Compensation to enhance image. 15. P / T RST Button Perform camera self-calibrate pan and tilt movement. (The Studio 4K does not support this feature)
- Page 11 Resetting the IP address of the camera from the remote: This Camera is in DHCP mode by default. [*] > [#] > [MANUAL]: Resets IP information to default [#] > [*] > [4]: Enable Dynamic IP address [#] > [*] > [#] > [1]: Sets IP address to 192.168.100.81 [#] >...
- Page 12 Quick Keys Zoom the camera IN. (When in the menu, directional key UP.) Zoom the camera OUT. (When in the menu, directional key DOWN.) Focus IN. (When in the menu, directional key LEFT.) Focus OUT. (When in the menu, directional key RIGHT.) The Auto-Focus button.
-
Page 13: Finding The Camera's Ip Address
Finding the Camera’s IP Address? Method 1: Use a Internet browser and type in “http:/ / ptzoptics.local/” to reach the camera’s web interface. You will be prompted to set up a username and password. Once logged in, click on the Network Settings tab to make adjustments to the camera’s network settings. -
Page 14: Mounting Options
Mounting Options Pipe Mounts Wall Mounts Ceiling Mounts Scan here to view mounting options Joysticks For those who prefer hardware control of our cameras, PTZOptics PT-JOY-G4 offers simplicity with fine-tune options, and the PT-SUPERJOY-G1 provides the highest level of customization and flexibility for advanced users. PT-JOY-G4 PT-SUPERJOY-G1 Scan here... - Page 15 PTZOptics Joystick PTZOptics carries two joysticks, the PT-SUPERJOY-G1, and the PT-JOY-G4, that can be used to control the Studio 4K via a network connection. Steps 1. Ensure the Studio 4K and the PTZOptics IP joystick are connected to the same network.
-
Page 16: Live Streaming
Live Streaming NDI® HX2 Connection The NDI HX2 connection allows you to connect and control the camera through any NDI compatible hardware or software on a Local Area Network. Once the camera is setup on a LAN, you can utilize the NDI HX2 connection. NDI Setup Download and install the latest NDI Tools from https:/ /www.ndi.tv/tools. -
Page 17: Rtsp Streaming
RTSP Streaming This camera is able to send an RTSP stream for viewing video through a LAN or Internet connection. Using VLC or another RTSP enabled video program, type the following string into the network streaming section: Stream 1 (HD): rtsp:/ /[IP ADDRESS]:554/1 Stream 2 (SD): rtsp:/ /[IP ADDRESS]:554/2... -
Page 18: Troubleshooting
Troubleshooting No image Check whether the power cord is connected, voltage is OK & power LED is lit. If using SDI or HDMI, check that the desired connection is selected to output video. You can select the desired connection from the OSD Menu or through the Web Interface. - Page 19 IR Remote controller does not control the camera Does one of the four “Camera Select” buttons at the top of the remote light up when you press any of the buttons?If not, change the batteries in the remote. Check that the remote and camera are on the same IR channel. The “Camera Select”...
Need help?
Do you have a question about the Studio 4K and is the answer not in the manual?
Questions and answers