Advertisement
Advertisement
Table of Contents
Related Manuals for Foamit FG-10N-2-TM
Summary of Contents for Foamit FG-10N-2-TM
- Page 1 10 Gallon Fog Unit With Timer Operation Manual FG-10N-2-TM READ ALL INSTRUCTIONS BEFORE USING OR SERVICING THIS UNIT. KEEP THIS MANUAL IN A LOCATION THAT IS READILY AVAILABLE TO USERS AND SERVICE TECHNICIANS. Scan this code for English (Original Instructions)
- Page 2 Touching damaged electrical cords may result in electrical shock, serious injury or death. Always inspect electrical cords and extension cords for damage before connecting the unit to power supply. DO NOT touch a damaged electrical cord, or extension cord, that is connected to power supply. Model: FG-10N-2-TM V20250128 • Page 2 of 9...
- Page 3 If needed, install an air dryer before the unit. PROTECT THE ENVIRONMENT Please dispose of packaging materials, old machine components, and hazardous fluids in an environmentally safe way according to local waste disposal regulations Model: FG-10N-2-TM V20250128 • Page 3 of 9...
-
Page 4: Product Overview
*Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings. **Area covered and run time may vary based on humidity, air flow, and product used. Model: FG-10N-2-TM V20250128 • Page 4 of 9... -
Page 5: Product Components
Product Components Get to know the FG-10N-2-TM components that you will need to use, adjust, or assemble. Back plate assembly • Inside view 1. In-line strainer 2. Quick-change pump 3. Air regulator 4. Air pressure gauge 5. Back plate thumb nuts 6. - Page 6 9. Solution tank 16. Circuit breaker 10. Drain plug 17. Electrical plug 11. Solution supply line 18. Power switch 12. Air supply line 19. Activation button 13. Air inlet valve 20. Air fitting Model: FG-10N-2-TM V20250128 • Page 6 of 9...
-
Page 7: Using Your Unit
17. Close the air inlet valve after all pressure has been relieved. Store unit with inlet valve closed. 18. Turn the power switch to the “OFF” position. 19. Before using the unit with another chemistry, thoroughly flush with water. Model: FG-10N-2-TM V20250128 • Page 7 of 9... - Page 8 0.1 M ON/OFF DELAY 1.0 M TR. DELAYED INT. 0.1 H ONE SHOT-FLASHER 1.0 H ON DELAY/FLASHER 10.0 H Note: Switches H, J, and K, are only used on dual mode functions Model: FG-10N-2-TM V20250128 • Page 8 of 9...
-
Page 9: Maintenance
To service your unit, refer to the service manual which includes: • Troubleshooting procedures. • Detailed parts breakdowns and illustrations. • Part numbers of serviceable components and assemblies. Scan this code for service manual Model: FG-10N-2-TM V20250128 • Page 9 of 9...
Need help?
Do you have a question about the FG-10N-2-TM and is the answer not in the manual?
Questions and answers