HOMCOM 853-034V70 Instruction Manual page 7

Ironing method
a) Grasp the lower part of the clothes and pull down to keep the surface smooth.
b) Use the steam nozzle with the microfibre cloth cover to lightly touch the clothing. For
hard clothing, use the brush. Gently press down and then drag the nozzle up and
down, using high-temperature steam to soften fibres.
c) When ironing the bottom of the clothing, hold both sides. Press up and down, left and
right, being careful of hot steam.
d) For collars, press down slightly and let the steam nozzle apply pressure for a longer
time.
e) For sleeves, straighten them and apply pressure with the steam nozzle for more time.
f) Complete ironing on one side and then the opposite.
g) After finishing, turn off the power.
4. CLEANING AND STORAGE:
1) Turn off the power switch and unplug the power cord.
2) Allow the machine to cool completely (at least 30 minutes).
3) Remove the water tank, open the water tank knob, pour out and wash the water tank,
then reattach it.
4) Open the self-cleaning button, pour out the water from the host, and then tighten the
button.
5) Place the machine in a dry location.
☆ Cleaning the boiler-house:
1) Turn off the power switch and unplug the power cord.
2) Allow the machine to cool completely (at least 30 minutes).
3) Remove the steam hose and telescopic pole from the host.
4) Remove the water tank.
5) Turn the host over and open the cleaning knob at the bottom of the boiler.
6) Use a small round brush with water in the boiler-house, clean back and forth, and then
tighten the boiler cleaning knob.
5. SAFETY INSTRUCTIONS
● Use the correct power supply voltage and frequency: 230V- 50Hz.
● Do not share with other high-power electrical home appliances.
● Do not immerse the machine, power cord or plug in water.
● Keep children and those with limited awareness away during use.
● First use cold water, not hot water, and always monitor water levels.
● Do not place the steam hose on the ground or bend it.
● Avoid touching hot parts or the steam nozzle to prevent burns.
● Allow the machine to cool (at least 30 minutes) and empty the tank before storing.
● Disconnect from power when filling or draining water.
● Turn off and unplug before cleaning or moving the machine.
● Keep away from combustible materials.
● Contact customer service if the product, plug or power supply is damaged.
● Do not pull out of steam hose during use.
7