INTRODUCTION Thank you for purchasing this Cortese® Stone Freestanding Basin. Please read this guide carefully before installing, using and cleaning this product, and retain it for future reference. If you have any queries in relation to this product or guide, please contact our Customer Service team on 020 3370 4057.
INSTALLATION STEPS Please note that this basin is designed for freestanding installation only, and we recommend that it is installed by a fully qualified plumber. Before installation, please observe all local plumbing and building codes, and inspect the waste and plumbing (replacing if necessary). 1 Prepare the installation area using the diagram in figure 1 for guidance.
Page 6
INSTALLATION STEPS (CONTINUED) 5 Connect the bottle trap to the wall outlet. 6 Apply sealant around the bottom of the basin - please note that you must not use epoxy resin as a sealant as this will void the product warranty. 7 Immediately wipe away any excess sealant, and fill any voids as needed, checking that the basin does not move out of position.
Do not use acidic or abrasive cleansers. Do not clean with a concentrated bleach or shampoo. Do not use scouring pads or other abrasive cleaning tools. Go to Lusso.com to activate your guarantee. Customer Care: 020 3370 4057 International: +44 20 3370 4057...
Need help?
Do you have a question about the Alina Earth 400 and is the answer not in the manual?
Questions and answers