Related Manuals for Lusso AQUAFLOW S101
Summary of Contents for Lusso AQUAFLOW S101
- Page 1 AQUAFLOW OVERFLOW BATH FILLER TAP WITH OVERFLOW & WASTE (S101) Installation & Maintenance Guide PLEASE RETAIN THIS MANUAL Customer Care: 0203 370 4057 (Option 2) International: +44 203 370 4057 (Option 2) FOR FUTURE USE...
- Page 2 Product Dimensions G1 1/2" Cold Water Inlet G1/2" G1/2" Hot Water Inlet...
- Page 3 Important Information Product Breakdown Please follow the instructions provided within this guide, as any damage caused by improper installation, use, or maintenance will void your warranty. • Do not use acidic cleansers • Do not use abrasive cleansers • Do not use abrasive cloths Maintenance Instructions •...
- Page 4 Installation Steps 1. A. Dismount the trap from the hose and remove the waste and the two rubber gaskets. B. Place the trap and rubber gasket underneath the bathtub, fit the waste and rubber gasket onto the Tighten Diameter: 50mm bathtub (refer to figure 1).
Need help?
Do you have a question about the AQUAFLOW S101 and is the answer not in the manual?
Questions and answers