NOTE: If you have a
DVD/CD-RW combo drive
and you experience
recording problems, first
check for available
software patches at the
Dell Support website at
support.dell.com and if
necessary, the Roxio
support website at
support.roxio.com.
74
U s i n g C D s , D V D s , a n d O t h e r M u l t i m e d i a
•
If you want to copy files from the Internet or files from a floppy or Zip
drive, copy those files to your hard drive first, and then burn your CD.
Your CD-RW drive requires a steady stream of data to properly record.
Direct Internet downloads, floppy drives, and Zip drives may not be
able to provide a steady data stream to your CD-RW drive.
•
Music MP3 files can be played only on MP3 players or on computers
that have MP3 software installed.
•
Ensure that you set the sampling rate to at least 128 Kbps when you
burn MP3 files to a CD. Otherwise, recording errors may occur.
•
Do not burn a blank CD-R or CD-RW disc to its maximum capacity;
for example, do not copy a 650-MB file to a 650-MB blank CD. The
CD-RW drive needs 1 or 2 MB of the blank CD to finalize the
recording.
•
Use a blank CD-RW disc to practice CD recording until you are
familiar with CD recording techniques. If you make a mistake, you can
erase the CD-RW disc and try again. You can also use blank CD-RW
discs to test music file projects before you record the project
permanently to a blank CD-R disc.
•
See the Roxio support website at support.roxio.com for additional
helpful tips.
How to Copy a CD
The procedure assumes that your computer is equipped with a single
CD-RW drive (without an additional CD drive). If your computer is
equipped with both types of drives, see the Roxio documentation for
instructions on how to copy CDs from a CD drive to a CD-RW drive.
Click the Start button, point to All Programs→ Roxio Easy CD
1
Creator, and then click Project Selector.
The Select a Project window appears.
Click Disc Copier. (Disc Copier is titled "CD Copier" in some versions
2
of Easy CD Creator Basic.)
The Disc Copier window appears and displays your CD-RW drive in
the Copy from and the Record to lists.