NOTICE: Handle components and cards by their edges, and avoid touching
pins and contacts. Ground yourself by touching a metal connector on the back
of the computer. Continue to ground yourself periodically during this
procedure.
Turn the computer over.
7
Loosen the captive screw from the Mini PCI card/modem cover, and
8
remove the cover.
If a Mini PCI card is not already installed, go to step 10. If you are
9
replacing a Mini PCI card, remove the existing card:
Disconnect the Mini PCI card from any attached cables.
a
Release the Mini PCI card by spreading the metal securing tabs
b
until the card pops up slightly.
Lift the Mini PCI card out of its connector.
c
Mini PCI card/modem cover
captive screw
Adding and Re placing Parts
129