arboleaf CM20C Manual

Table of Contents

Contents

1 SPECIFICATIONS
2 PRODUCT OVERVIEW
- 2.1 Device
- 2.2 Accessories
3 QUICK START GUIDE
4 IMPORTANT SAFEGUARDS
5 Documents / Resources
- 5.1 References
- 5.2 Download manual

SPECIFICATIONS

Model: CM20C
Dimensions: 5.4" x 3.6" x 1 8" (137 x 92 x 45 mm)
Net weight: 15 oz (425 g)
Speed settings: 5
Speed: 1000 - 3200 rpm
Every working time setting: up to 10 min
Power supply. rechargeable lithium battery
Battery charging time: approx. 3 h
Battery life: 7 hours run time
Maximum voltage: 8 4 V
Maximum current: 7.2 A
Maximum power: 60 W
Rated input: 5V 2A
Working noise: < 45 dB

Product Dimensions

PRODUCT OVERVIEW

Device

PRODUCT OVERVIEW

Interchangeable attachment head
Grip
Speed setting indicator
Battery level indicator
Power on-off / Speed switch button
USB port

Accessories

Attachment heads
1. Ball head
2. Fork head
3. Bullet head
4. Flat head
USB cable

QUICK START GUIDE

Charge the device
Connect the enclosed USB cable with a power adapter (not included). The LED display color indicates the battery level.
1. The red light flashes - the battery level is low.
2. The red light stays on - the battery is in charging.
3. The green light stays on - the battery is fully charged
Select an attachment head
1. Ball head: Low impact for massaging sensitive and sore areas
2. Fork head: Designed for massaging the spine and neck
3. Bullet head: Pinpoint massage including hands, feet and knots
4. Flat head: Great for massaging large muscle groups and overall use
Insert the selected attachment head to the device
Note: Never change an attachment head when the device is on
Turn on the device
Press the Power on-off/Speed switch button for 2 seconds to turn on the massager. Initially it will be set at Speed 1
Note: Press the Power on-off/Speed switch button for 2 seconds toggles power on and off.
Set your desired speed
After the device is on, tap the Power on-off/Speed switch button , speed will be shifted up and the next speed light is on. Keep tapping the button until your desired speed light is on. The speed setting is done
Note: The higher the speed, the higher the intensity of the massage. Below is the general guideline for your reference
1. Speed 1 - 2000 rpm: for warming up muscles or very sore muscles
2. Speed 2 - 2500 rpm: for soothing tired muscles or sore muscles
3. Speed 3 - 3000 rpm: for relaxing stiff muscles
4. Speed 4 - 3200 rpm: for massaging very stiff muscles or deep tight knots
5. Speed 5 - 1000 - 3200 rpm: automatically adjust the speed according to the pressing force
Massage
Apply massage head to your body's soft tissues or the target areas of the body.
Auto power off protection
1. Battery low protection. When the voltage is dropped to 7 3V, the red indicator starts to flash. The device will be shut off when the voltage below 7V.
2. Maximum run-time protection. The device will automatically stop when it runs at the same time for 10 minutes. To re-start, press the Power on-off/Speed switch button for 2 seconds to turn on the massager, and then tap the button to set the next speed

IMPORTANT SAFEGUARDS

Read all instructions.
This device is not intended to diagnose, treat, cure or prevent any disease.
Consult your physician before use if you experience any pain or have any following health conditions:
1. You are pregnant, or have diabetes, retinal problems, or neuropathy.
2. You have internal medical devices in your body.
3. You have other medical conditions or health concerns.
This device is charged by a 5V/2A charger or some fast charging power adapter.
Fully charge the device before its first use. Do not switch on the massage gun while it is charging!
Do not replace the attachment head while it is running.
Do not immerse this device in the water or other liquid.
Do not use this device to massage your head, chest, genital, or any area with wounds. Avoid massaging the surgical area during the healing process.
Do not attempt to repair the device yourself.