Nice Elero ProLine 2 Manual

Knowing what's up!
Status LED display
of the ProLine
Colour and frequency
Flashing Orange (2 Hz)
Flickering Orange (20 Hz)
Orange and then green
Orange and then red
Red and then green
Red and then red
Green
Orange and green alternating, then
Red fl ashing
Explanation of the push buttons on the example of the LumeroCom
Status LED
UP button ▲
STOP button ●
DOWN button ▼
2 transmitter
Channel is empty or not yet programmed
Channel is in bidirectional programming
mode (at least one bidirectional receiver is
also in programming mode)
Channel is bidirectionally programmed and
the receiver has received the signal.
Channel is bidirectionally programmed and
one of the receivers has not received the signal
Channel is bidirectionally programmed
and the receiver has received the signal.
Batteries are low!
Channel is bidirectionally programmed and one of the
receivers has not received the signal.
Batteries are low!
Channel is in unidirectional mode
red Channel (transmitter) is deleted
Batteries are very low!
Programming
button P
Selective
programming
button S
Meaning
Explanation of the push buttons on the example of the LumeroTel 2
UP button ▲
STOP button ●
Status LED
DOWN button ▼
Programming
button P