Nice MyGo MYGO2BD Instructions And Warnings For Installation And Use

Nice MyGo MYGO2BD Instructions And Warnings For Installation And Use

Two-way transmitters

Advertisement

Quick Links

MyGO
MYGO2BD
MYGO4BD
MYGO8BD
Two-way transmitters
EN - Instructions and warnings for installation and use
1
5
2
6
3
7
4
8

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MyGo MYGO2BD and is the answer not in the manual?

Questions and answers

Summary of Contents for Nice MyGo MYGO2BD

  • Page 1 MyGO MYGO2BD MYGO4BD MYGO8BD Two-way transmitters EN - Instructions and warnings for installation and use...
  • Page 2: Table Of Contents

    – If the battery compartment does not close tightly, stop using the product and keep it out of reach of children. – The manufacturer of this appliance, Nice S.p.A., hereby declares that the product complies with Directive 2014/53/EU. – The instruction manual and the full text of the EU Declaration of Conformity are available at the following Internet address: www.niceforyou.com, under the “support”...
  • Page 3: Product Description And Intended Use

    PRODUCT DESCRIPTION AND INTENDED USE PRODUCT DESCRIPTION AND INTENDED USE Transmitters of the series MYGOBD are designed to control automations (gates, garage doors, road barriers and similar). CAUTION! – Any use other than that specified herein or in environmental conditions other than those stated in this manual is to be considered improper and is strictly forbidden! LIST OF CONSTITUENT PARTS “Figure 1”...
  • Page 4: Memorising The Transmitter

    3.2.4 MEMORISATION THROUGH THE “ENABLING CODE” MEMORISING THE TRANSMITTER (BETWEEN AN OLD TRANSMITTER ALREADY MEMORISED AND A NEW TRANSMITTER) MEMORISING THE TRANSMITTER The MYGOBD transmitter has a secret code, the so-called “ENABLING CODE”. By transferring this code from a memorised transmitter to a new TRANSMITTER VERIFICATION transmitter, the latter is recognised (and memorised) automatically by the Before memorising the transmitter in the automation’s receiver, ensure that...
  • Page 5: Status Request Procedure

    In this specific case, Nice S.p.A. cannot offer any guarantee regarding the status of all the automations. REPLACING THE BATTERY...
  • Page 6: Product Disposal

    press the battery in point (1) and twist the case (B) to release the PRODUCT DISPOSAL battery from the clip holding it (2) so that it can be removed PRODUCT DISPOSAL This product is an integral part of the operator and must therefore be disposed of with it.
  • Page 7: Technical Specifications

    TECHNICAL SPECIFICATIONS All technical specifications stated in this section refer – INGESTION HAZARD: This product contains a to an ambient temperature of 20°C (± 5°C). Nice S.p.A. button cell or coin battery. – DEATH or serious injury can occur if ingested.
  • Page 8 Nice SpA Via Callalta, 1 31046 Oderzo TV Italy www.niceforyou.com info@niceforyou.com...

This manual is also suitable for:

Mygo mygo4bdMygo mygo8bd

Table of Contents