Fnirsi GC-02 User Manual page 21

When the device running time is equal to the start
time, the monitoring mode starts recording, and the
interface display changes from [Figure 1] to [Figure 2]
status, at this point, the monitoring mode starts
timing the running time and records the cumulative
value, average value, and maximum value, the three
values are displayed in a cycle, when the equipment
running time reaches the deadline, the interface
changes to [Figure 3], completing the measurement
from start to deadline.
Figure 1
History records page
This page reflects some radiation levels previously
recorded on a regular basis, making it easy for users
to analyze historical data, and can record up to 10
groups. Press the left and right keys to switch to
monitoring mode history, and the page is as follows:
The first historical record is the latest record, and the
cumulative value, average maximum value, and
running time will be dynamically updated.
Figure 2 Figure 3
Current real-time
measurement rate
History Number
Monitoring mode
running time