Safety instructions Built-under and built-in appliances should always be installed under a Delivery continuous work surface which is attached to the adjacent cupboards, in Immediately check the packaging and order to ensure that the appliance is dishwasher for any damage which may entirely stable.
Page 5
In daily use Child-proof lock* * some models Warning Comply with the drawings in the back of the envelope. Knives and other utensils with sharp points Switch on the child-proof lock must be placed in the baskets either flat or with the points downwards.
Getting to know your Appliance interior appliance Upper basket with 2-tiered cup rack Additional cutlery basket for the top Diagrams of the control panel and the basket * interior of the appliance can be found Upper spray arm in the envelope at the front. Lower spray arm Individual positions are referred to in the text.
Water softener Hold down programme button B and switch on the main switch, then In order to rinse dishes and glasses release both buttons. satisfactorily, the dishwasher requires soft water, i.e. containing little or no lime, The LED for button B flashes and the otherwise water stains will be left behind digital display displays the factory on crockery and glasses, etc.
Filling in the Salt The LOW SALT indicator on the front panel will light up initially but will extinguish Open the screw-type cap of the again after a short period when the salt compartment solution has become sufficiently concentrated. Warning Note Before switching on the appliance for the first time, pour approx.
Adding rinse aid Adjusting the amount of rinse-aid The rinse aid is required for stain-free The amount of rinse-aid added to the utensils and clear glasses. water can be varied by adjusting the Use only rinse aid for domestic stepless control. The rinse-aid control has dishwashers.
Not suitable for Damage to glassware and other dishes the dishwasher Possible causes: The following should not be type of glass or manufacturing process cleaned in the dishwasher: chemical composition of detergent Wooden cutlery and utensils – these water temperature and duration of will leach out and become unsightly;...
Arranging crockery, glasses, Pots and pans etc. in the dishwasher Lower basket Loading the dishwasher Scrape off any large amounts of left-over food. It is not necessary to rinse the dishes under running water. Place objects in the dishwasher in such a way that D items such as cups, glasses, pots/pans, etc.
Page 12
Shelf * Adjusting position of basket * * not on all models * not on all models Lean tall glasses and those with long stems against the shelf – not against other items to be washed. Ø max. 20/*25cm Ø max. 20/*25cm Ø...
Page 13
Top basket with side levers Baking sheet spray head * (Rackmatic) * some models You can clean large baking sheets or Pull out the top basket. grilles with the baking sheet spray head. To do this, remove the top basket and insert the spray head as illustrated in the diagram.
Detergents Detergent compartment with measuring marks Information about detergents The side of the detergent compartment is You can use any brand of liquid or powder marked with lines to help you determine detergent, as well as tablets, that have how much powder to add. been specifically designed for use in The capacity of the detergent container is domestic dishwashers.
auto 3in1 Reduce costs! The use of so-called combined detergent If you are using the upper rack products may make the use of rinse aid only, or if your dishes are only and/or salt unnecessary. moderately dirty, it will normally There are currently several types of suffice to employ a reduced combined detergent products available.
Page 16
Switching the salt refill Note indicator / water softening Optimum rinsing and drying results can be system off and on obtained by using standard detergents in Hold down the programme button B conjunction with separate application of and switch on the main switch salt and rinse aid.
Overview of programmes The max. possible number of programmes is illustrated in this overview. The corresponding programmes for your appliance can be found on the fascia. Type of dishes e.g. porcelain Non- Delicate pans, Mixed Mixed sensitive cutlery, glasses, etc. Type of food Soups, soufflés, Coffee,...
Washing dishes Switching the dishwasher ON Turn on the tap. Set main switch to ON. Reduce costs! Indicators light up according to the last programme that was selected. If only a small number of This same programme will run again if dishes have been loaded into no other programme button the dishwasher, selecting a...
Page 19
Time delay * Switching the dishwasher OFF Several minutes after the programme has on applicable models ended: You can delay the start of the programme Open the door when the programme in 1-hour steps up to 19 hours. has ended. Switch on the appliance.
Changing the programme Additional functions It is possible to change the programme on some models additional functions within 2 minutes after you have switched can be set with the buttons. the dishwasher on. Should it be necessary to change the Pre-Soak * programme after this period, the programme cycle that has already been...
Maintenance and care Filters The filters prevent larger remnants of A regular inspection and maintenance food or other objects from getting inside of your machine will help to prevent faults. the pump. This residue can occasionally This saves time and prevents problems. clog up the filters.
Page 22
Spray arms Reassembly: Insert the filter system and screw down Lime and remnants of food in the washing with the filter cylinder. water can block the nozzles in the spray arms and the arm mountings . Inspect the nozzles in the spray arms for blocked holes due to remnants of food.
Pump * Fault finding on applicable models Resolving minor problems Larger remnants of food that have not yourself been trapped by the filters and have been Experience has shown that you can left in the water can cause a blockage in resolve most problems that arise during the pump.
Page 24
The filter on the water supply hose Refill display does not light up. is blocked. Rinse aid refill indicator switched Switch off the appliance and pull off. (see auto 3in1 chapter) out the mains plug. Turn off the Salt refill indicator switched off. tap.
Page 25
Knocking sound coming from inlet Dishes, cutlery, etc. have not been valves dried This is caused by the way the Selected programme did not water pipes have been laid and it include drying function. has no effect upon the way the Amount of rinse-aid was set too appliance functions.
Customer Service Information Please call your local service agent, if you Notes on comparison tests are not able to resolve any problem You will find details of the conditions for yourself. The name of your nearest service the comparison tests on the additional agent is shown in the Customer Service ”Notes on comparison tests”...
Installation Fresh water connection Using the enclosed parts, connect the The dishwasher must be connected by fresh water connection to the tap a qualified technician to ensure correct according to the installation instructions. operation. The specifications for supply, Ensure that the fresh water connection is drainage and connected load must fulfil not kinked, crushed or twisted.
Removing the appliance Protection from freezing temperatures It is essential, when removing the appliance, to observe the following If the appliance is installed in a location sequence: First, disconnect the appliance where there is a risk of freezing from the power supply. temperatures (e.g.
Page 29
Disposal of the packaging Warning Please dispose of the packaging Children could become locked in the material in an environmentally appliance (risk of suffocation) or find friendly manner. themselves in other dangerous situations. Keep children away from shipping carton and packaging components. Therefore: Pull out the mains plug, sever Danger of suffocation from folding and dispose of the power cord.
Page 32
Balay (BYSE Electrodomésticos, S.A.) BSH Electrodomésticos España S.A. Avda. de la Industria, 49 50059 Zaragoza (Spain) To contact us directly, use the tel. no or fax no. in the 9000 106 122 en (8508) enclosed customer service list. 638V+...
Need help?
Do you have a question about the 3VS952ID and is the answer not in the manual?
Questions and answers