Table of Contents
Advertisement
Technical data
60 x 60 x 85 cm
Dimensions (DxWxH)
Weight
approximately 35 kg
Max. capacity
7 kg
Condensation container
approx. 4.2 l
Ambient temperature
5 - 35 °C
Connection voltage
220 - 240 V
Connected load
2025 / 2600 W
Fuse protection
10 / 16 A
Product number
Production number
You can find the rating plate on the back of the dryer.
Consumption rates
These are guide values determined under standard
conditions. Deviations of up to 10 % are possible. The value
on the label is achieved at the maximum heat setting.
resistentes/algod.
(Cottons)
7 kg
seco armario
(Cupboard Dry)*
seco + (Iron Dry) *
sintéticos (Easy-Care)
3.5 kg
seco armario
(Cupboard Dry)*
*Test program to DIN EN 61121.
**The values may deviate from the values shown here, because of over/undervoltage, type of
fabric, composition of the laundry to be dried, residual moisture in the material and size of the
load.
Optional accessories
Washer-dryer stack connection set
WZ
The dryer can be placed on top of a suitable washing machine with the same width and depth
20311
to save space. This connection set must always be used to secure the dryer to the washing
machine. If the worktop of the washing machine is less than 544 mm deep, please consult
the after-sales service or your specialist retailer.
Platform
WZ
For easier loading and unloading. The basket in the pull-out can be used for carrying the
20460
laundry.
Installation underneath the worktop
WZ
Risk of electric shock.
20295
Instead of the appliance covering plate, you must have a metal cover fitted by an expert.
Rating plate or inside of the door
Spin speed in rpm
Drying time** in
(residual moisture)
minutes, includ-
ing 8 minutes
cool cycle
10 A
16 A
1400 (aprox. 50%)
98
90
1000 (aprox. 60%)
117
106
800 (aprox. 70%)
138
120
1400 (aprox. 50%)
76
66
1000 (aprox. 60%)
91
82
800 (aprox. 70%)
106
96
800 (aprox. 40%)
42
40
45
600 (aprox. 50%)
53
(order from the after-sales service using the order number)
What to do if ...
Repairs must only be carried out by the after sales service or an authorised expert.
Before you contact the after-sales service, please make sure that you are unable to resolve
the problem yourself. You will be charged for advice if a technician is called out, even during
the warranty period. You can find your nearest after-sales service in the enclosed list. When
contacting the after-sales service, please quote the appliance's product number (E-Nr.) and
production number (FD) (
The
inicio/stop (start/stop)
indicator light does not come on.
The depósito (container)
limp.
/
comes on.
The depósito (container)
limp.
/
is flashing.
Dryer does not start.
Energy
consumption**
in kWh
Programme stops shortly after it
has started.
10 A
16 A
Water is leaking out.
3.32
3.32
The door opens by itself.
The required degree of dryness
3.92
3.92
was not achieved or the drying
4.48
4.48
time was too long.
2.45
2.45
2.94
2.94
3.43
3.43
1.16
1.16
1.45
1.45
Laundry damp.
The humidity in the room
has increased significantly.
One or more indicator lights is/are
flashing.
Mains failure.
If you cannot rectify a fault yourself or a repair is necessary:
– Set the programme selector to stop (Off).
– Remove the appliance plug from the socket.
– Call the after-sales service
9
on the inside of the door).
Mains plug plugged in?
Programme selected?
Empty the condensation container
(clean) indicator light
Clean the fluff filter
(clean) indicator light
Clean the air cooler if necessary
Has the
inicio/stop (start/stop) button been pressed?
Door closed?
Programme set?
Ambient temperature greater than 5 °C?
Make sure the dryer is level.
Push the door closed until you hear it engage.
Clean the fluff filter
Empty the condensation container.
Ambient temperature higher than 35 °C
Air inlet may be blocked
Was an unsuitable programme selected?
Has the dryer been installed with sufficient space on all
sides? Ensure that air can circulate.
Mains failure
Restart the dryer.
Thin layer of limescale on the moisture sensors. Clean the
moisture sensors
Use the next drying programme up or use the timer
programme as a supplement
Warm laundry feels damper than it really is!
Make sure the room is sufficiently ventilated.
Air inlet blocked?
Ensure that the air cooler is in use.
Clean the air fluff filter and air cooler if necessary
page 4/6.
Check the installation conditions
Switch off, allow to cool, switch on again and restart the
programme.
Remove laundry from the dryer immediately and spread
out. This allows the heat to dissipate.
after-sales service directory.
page 4.
page 4.
page 6.
page 4.
airing.
keep unobstructed.
page 7.
page 6.
page 7.
keep unobstructed.
page 8.
10
Advertisement
Table of Contents
