Advertisement
Quick Links
Instructions for use
GB
English,1
FDF 9640
!
This symbol reminds you to read this instruc-
tion manual.
Contents
Installation, 2-3-4-5
Unpacking and levelling
Connecting the electricity and water supplies
The first wash cycle
Technical data
Care and maintenance, 6
Cutting off the water and electricity supplies
Cleaning the washer-dryer
Cleaning the detergent dispenser drawer
Caring for the door and drum of your appliance
Cleaning the pump
Checking the water inlet hose
Precautions and advice, 7
General safety
Disposal
Description of the washer-dryer, 8-9
Control panel
Display
How to run a wash cycle or a drying cycle, 10
Wash cycles and options, 11
Table of programmes and wash cycles
Wash options
Detergents and laundry, 12
Detergent dispenser drawer
Preparing the laundry
Special wash cycles
Load balancing system
Troubleshooting, 13-14
Product Guarantee and Repair Information, 15
WASHER-DRYER
1
GB
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Hotpoint FDF 9640
Summary of Contents for Hotpoint FDF 9640
- Page 1 Cleaning the washer-dryer Cleaning the detergent dispenser drawer Caring for the door and drum of your appliance Cleaning the pump Checking the water inlet hose Precautions and advice, 7 FDF 9640 General safety Disposal Description of the washer-dryer, 8-9 Control panel Display...
- Page 2 Installation ! Keep this instruction manual in a safe place unevenness by tightening or loosening the for future reference. Should the appliance adjustable front feet (see figure); the angle of inclination, measured according to the be sold, transferred or moved, make sure worktop, must not exceed 2°.
- Page 3 Connecting the drain hose • the supply voltage is included within the values indicated on the Technical Data Plate Connect the drain fixed on the machine. hose, without bending • the socket is compatible with the washer- it, to a draining dryer’s plug.
- Page 4 As the colours of the wires in the lead may ! The power supply cable must only be not correspond with the coloured markings replaced by an authorised serviceman. identifying the terminals in your plug, proceed as follows: Warning! The company denies all liability if and Connect Green &...
- Page 5 Technical data Model FDF 9640 width 59.5 cm Dimensions height 85 cm depth 54 cm from 1 to 9 kg for the wash programme Capacity from 1 to 6 kg for the drying programme Electrical please refer to the technical...
- Page 6 Care and maintenance Cutting off the water and Caring for the door and drum of electricity supplies your appliance • Turn off the water tap after every wash cycle. • Always leave the porthole door ajar in order This will limit wear on the hydraulic system to prevent unpleasant odours from forming.
- Page 7 Precautions and tips • ! This washer-dryer was designed and constructed in Make sure that the water tap is turned on during accordance with international safety regulations. The the drying cycles. following information is provided for safety reasons and • Children of less than 3 years should be kept away from the appliance unless continuou- must therefore be read carefully.
- Page 8 Description of the washer-dryer Control panel TEMPERATURE CLEANING button ACTION LOCK button button ON/OFF button DISPLAY START/PAUSE button and indicator SPIN WASH light Detergent dispenser drawer button CYCLE OPTION SELECTOR buttons and KNOB indicator lights button Detergent dispenser drawer: used to dispense DRY button : press to decrease or exclude drying;...
- Page 9 Display The display is useful when programming the machine and provides a great deal of information. The duration of the available wash cycles and the remaining time of a running cycle appear in section A (the display will show the maximum duration of the cycle chosen, which may decrease after several minutes, since the effective duration of the programme varies depending on the wash load and the settings chosen);...
- Page 10 How to run a wash cycle or a drying cycle Selecting the cotton drying cycle through the programme 1. SWITCH THE MACHINE ON. Press the button; the selector knob and pressing the “Eco” button activates an START/PAUSE indicator light will flash slowly in a green colour. automatic drying cycle that allows for saving energy, thanks 2.
- Page 11 Wash cycles and options Table of programmes and wash cycles Detergents Max. Max. Max. Cycle Description of the wash cycle temp. speed Drying load duration (kg) (°C) (rpm) Fabric Wash softener CLEAN Plus 1 Anti-Stain 40° 1400 2 Anti-Stain Quick 40°...
- Page 12 Detergents and laundry Detergent dispenser drawer If the drying function is selected, a drying cycle automatically activates at the end of the wash cycle that resembles open- Successful washing results also depend on the correct air drying, with the added advantages of preserving garments dose of detergent: adding too much detergent will not from yellowing due to sunlight exposure and preventing loss necessarily result in a more efficient wash, and may in...
- Page 13 Troubleshooting Your washer-dryer could occasionally fail to work. Before contacting the Technical Assistance Service (see “ Service”), make sure that the problem cannot be solved easily using the following list. Problem: Possible causes / Solutions: The machine does not switch on. •...
- Page 14 The machine is noisy. • There will always be some motor, pump and drum noise during spin. The machine wont spin properly. • Out of Balance detected when attempting to go into a spin cycle - If this happens the machine will continue to try to repeat the distribution of the load required before the machine will go into higher spin speeds - This will increase the programme time accordingly.
- Page 15 Product Guarantee and Repair Information Guarantee Recycling and Disposal Information As part of Hotpoint’s continued commitment to 12 Months Parts and Labour Guarantee helping the environment, Hotpoint reserves the right Your appliance has the benefit of our manufacturer’s to use quality, recycled components to keep down guarantee, which covers the cost of breakdown customer costs and minimise material wastage.
- Page 16 11111580 04/2017 Whirlpool EMEA S.p.A. - Socio Unico via Carlo Pisacane n.1, 20016 Pero (MI) Italy www.hotpoint.co.uk...
Need help?
Do you have a question about the FDF 9640 and is the answer not in the manual?
Questions and answers