Siemens RUGGEDCOM ROS v5.0 User Manual page 19

RUGGEDCOM ROS
User Guide
• Section 1.5.3, "Supported Agent Capabilities"
Section 1.5.1
Supported Standard MIBs
RUGGEDCOM ROS supports the following standard MIBs:
Standard
RFC 2578
RFC 2579
RFC 2580
RFC 1907
RFC 2011
RFC 2012
RFC 2013
RFC 1659
RFC 2863
RFC 2819
RFC 4188
RFC 4318
RFC 3411
RFC 3414
RFC 3415
RFC 4363
IEEE C37.238-2011
Section 1.5.2
Supported Proprietary RUGGEDCOM MIBs
RUGGEDCOM ROS supports the following proprietary RUGGEDCOM MIBs:
Supported Standard MIBs
MIB Name
SNMPv2-SMI
SNMPv2-TC
SNMPv2-CONF
IANAifType
SNMPv2-MIB
IP-MIB
TCP-MIB
UDP-MIB
RS-232-MIB
IF-MIB
RMON-MIB
BRIDGE-MIB
RSTP-MIB
SNMP-FRAMEWORK-MIB
SNMP-USER-BASED-SM-MIB
SNMP-VIEW-BASED-ACM-MIB
Q-BRIDGE-MIB
IEEEC37.238-MIB
Structure of Management Information Version 2
Textual conventions for SMIv2
Conformance statements for SMIv2
Enumerated values of the ifType Object Defined ifTable defined in IF-
MIB
Management Information Base for SNMPv2
SNMPv2 Management Information Base for Internet Protocol using
SMIv2
SNMPv2 Management Information Base for the Transmission Control
Protocol using SMIv2
Management Information Base for the UDP using SMIv2
Definitions of managed objects for RS-232-like hardware devices
The Interface Group MIB
Remote Network Monitoring (RMON) management Information base
Definitions of managed objects for bridges
Definitions of managed objects for bridges with Rapid Spanning Tree
Protocol (RSTP)
An architecture for describing Simple Network Management Protocol
(SNMP) Management Framework
User-based Security Model (USM) for Version 3 of the Simple
Network Management Protocol (SNMPv3)
View-based Access Control Model (VACM) for the Simple
Management Protocol (SNMP)
Definitions of Managed Objects for Bridges with traffic classes,
multicast filtering, and virtual LAN extensions
IEEE Standard Profile for use of IEEE 1588 Precision Time Protocol in
power system applications
Introduction
Title
Chapter 1
7