Page 1
1-847-429-9263 (M-F 8AM-5PM CST) TECHSUPPORT@WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
Page 2
General Safety Rules ..................4 BEFORE OPERATING Unpacking & Packing List .................6 Know Your Tool Chest & Cabinet System ............7 Assembly & Adjustments (Model GG261T) ............. 8 Assembly & Adjustments (Model GG262B) ............. 9 MAINTENANCE Maintenance ....................10 Exploded View & Parts List ................11...
Page 3
INTRODUCTION Thanks for purchasing the WEN Tool Chest / Tool Cabinet. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and un- derstand this operator’s manual and all the labels affixed to the tool.
Page 4
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Page 5
GENERAL SAFETY RULES WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Safety is a combination of common sense, staying alert and knowing how your item works. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
Page 6
If any part is missing or broken, please contact customer service at 1-847-429-9263 (M-F 8-5 CST), or email techsupport@wenproducts.com. GG261T PACKING LIST GG261T Components GG261T Hardware & Accessories Key (2) Plastic Feet (4) Drawer Liners (5) Tool Chest (1)
Page 7
KNOW YOUR TOOL CHEST & CABINET SYSTEM TOOL PURPOSE Keep your workshop clean and organized with the WEN Tool Chest and Cabinet System. Refer to the diagram below to become familiarized with the parts and features of your tool. GG261T...
Page 8
1. Insert the four plastic feet (Fig. 1 - 1) into the four holes on the bottom of the chest. NOTE: If you are mounting model GG261T onto GG262B then you do not need to assemble the plastic feet. REMOVING & INSERTING THE DRAWERS To remove the drawers: 1.
Page 9
ASSEMBLY & ADJUSTMENTS (MODEL GG262B) WARNING! Do not utilize this item until it is fully assembled according to the instructions. Failure to follow the safety instructions may result in serious personal injury. Fig. 3 CAUTION! Two people are recommended for assembly. ATTACHING THE HANDLE NOTE: The handle can be installed on either the right or left side of the cabinet depending on your preference.
Page 10
MAINTENANCE ROUTINE INSPECTION Before each use, inspect the general condition of the tool. If any of these following conditions exist, do not use until parts are replaced or the tool chest is properly repaired. Check for: • Loose hardware or improper mounting •...
Page 11
EXPLODED VIEW & PARTS LIST GG261T PART NO. DESCRIPTION QTY. GG261T-001 Gas Strut GG261T-002 Drawer Slide GG261T-003 Lock GG261T-004 GG261T-005 Plastic Foot GG261T-006 Side Handle GG261T-007 Plaque GG261T-008 Drawer Handle Cap GG261T-009 Drawer Liner NOTE: Not all parts may be available for replacement or purchase.
Page 12
EXPLODED VIEW & PARTS LIST GG262B PART NO. DESCRIPTION QTY. GG262B-001 Cabinet Handle GG262B-002 Fixed Caster GG262B-003 Swivel Caster GG262B-004 Lock GG262B-005 GG262B-006 Plaque GG262B-007 Drawer Slide (1) GG262B-008 Caster Bolt GG262B-009 Handle Bolt GG262B-010 Drawer Handle Cap GG262B-011 Drawer Liner GG262B-012 Drawer Slide (2) NOTE: Not all parts may be available for replacement or purchase.
Page 13
WARRANTY STATEMENT WEN Products is committed to building tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN consumer power tools will be free from defects in material or workmanship during personal use for a period of two (2) years used for professional or commercial use.
Need help?
Do you have a question about the GG261T and is the answer not in the manual?
Questions and answers