Advertisement
Quick Links
For replacement parts visit
WENPRODUCTS.COM
Your new tool has been engineered and manufactured to WEN's highest standards for dependability, ease
of operation, and operator safety. When properly cared for, this product will supply you years of rugged,
trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If
you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
NOTICE: Please refer to wenproducts.com for the most up-to-date instruction manual.
WORK STATION
IMPORTANT:
NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us at:
800-232-1195
techsupport@wenproducts.com
WENPRODUCTS.COM
WITH LIGHT
(M-F 8AM-5PM CST)
Model # WB4723
bit.ly/wenvideo
Advertisement
Related Manuals for Wen WB4723
Summary of Contents for Wen WB4723
- Page 1 WENPRODUCTS.COM IMPORTANT: Your new tool has been engineered and manufactured to WEN’s highest standards for dependability, ease of operation, and operator safety. When properly cared for, this product will supply you years of rugged, trouble-free performance. Pay close attention to the rules for safe operation, warnings, and cautions. If you use your tool properly and for its intended purpose, you will enjoy years of safe, reliable service.
- Page 2 Maintenance Exploded View & Parts List Assembly & Adjustments Warranty Statement PRODUCT SPECIFICATIONS Model Number: WB4723 Maximum Weight Capacity: Total - 514 lbs (Evenly Distributed) Table Top - 220 lbs Bottom Shelf - 200 lbs Each Drawer - 25 lbs...
-
Page 3: Important Safety Rules
IMPORTANT SAFETY RULES Safety is a combination of common sense, staying alert and knowing how your item works. SAVE THESE SAFETY INSTRUCTIONS. WARNING: To avoid mistakes and serious injury, read and understand this entire instruction manual. Learn the tool’s applications, limitations, and possible hazards. These safety rules cannot address every possible scenario you may encounter, so please use common sense and caution when using the tool. -
Page 4: Electrical Information
ELECTRICAL INFORMATION GROUNDING INSTRUCTIONS In the event of a malfunction or breakdown, grounding provides the path of least resistance for an electric current and reduces the risk of electric shock. This tool is equipped with an electric cord that has an equipment grounding conductor and a grounding plug. -
Page 5: Maintenance
MAINTENANCE WARNING: To avoid accidents, make sure the power switch is in the OFF position and unplug the tool from the electrical outlet before assembly, cleaning or performing any maintenance. 1. Before each use, inspect the general condition of the tool. Check for: •... -
Page 6: Exploded View & Parts List
Unpack and remove all parts from the box. Check all components and organize them according to the parts list below. If any part is damaged or missing, please contact our customer service at (800) 232-1195, M-F 8-5 CST or email us at techsupport@wenproducts.com. Part No. Description Qty. WB4723-001 Front Post WB4723-002 Back Post WB4723-003 Rubber Foot... - Page 7 EXPLODED VIEW & PARTS LIST (Under Part 20)
-
Page 8: Assembly & Adjustments
including all text under subheadings therein before set up or use of this product. Read the ENTIRE IMPORTANT SAFETY INFORMATIONS section at the beginning of t including all text under subheadings therein before set up or use of this product. ASSEMBLY &... - Page 9 5. Attach Power Strip (22) to Side Beam with Power Strip Opening using U Brackets ASSEMBLY & ADJUSTMENTS (F) and Screws (E). (See Figure C.) 4. Installing Upper Side Beams (4, 4A) Attach one side beam (4) and the side beam with power strip opening (4A) to the top 2 holes on the front posts (1) and middle 2 holes on the back...
- Page 10 to the Front (11) and Back (12) D Repeat for second Drawer. (See ASSEMBLY & ADJUSTMENTS 12. Install the Drawers, making sure Attach Front (7F) and Back (7B) Drawer 11. Lay Drawer Bottom (13) down on a Brackets to Top Beams (6). (See Figure E.) Attach Right (10R) and Left (10L) D the Drawers are level with the Dr to the Front (11) and Back (12) Draw...
- Page 11 to the Front (11) and Back (12) Drawer Panels. Repeat for second Drawer. (See Figure G.) ASSEMBLY & ADJUSTMENTS 12. Install the Drawers, making sure the runners on the Drawers are level with the Drawer Mounts 11. Attaching Drawer Panels (10L, 10R, 11, 12, 13) Lay one drawer bottom (13) down on a flat surface.
- Page 12 using Bolts, Washers and Nuts (C). using Bolts, Washers and Nuts (D). (S (See Figure I.) ASSEMBLY & ADJUSTMENTS 17. Attach Pegboard (18) to Back Upper Posts (15) 19. Attach Top Shelf (21) to the Shelf Beams using Bolts, Washers and Nuts (C). using Bolts, Washers and Nuts (D).
- Page 13 ASSEMBLY & ADJUSTMENTS 19. Attach Top Shelf (21) to the Shelf Beams (17L, 17R) using Bolts, Washers and Nuts (D). (See Figure K.) 19. Attaching Top Shelf (21) Attach the top shelf (21) to the shelf beams (17L, 17R) using bolts, wash- ers and nuts (D).
- Page 14 LIMITED TWO YEAR WARRANTY WEN Products is committed to build tools that are dependable for years. Our warranties are consistent with this commitment and our dedication to quality. LIMITED WARRANTY OF WEN CONSUMER POWER TOOLS PRODUCTS FOR HOME USE GREAT LAKES TECHNOLOGIES, LLC (“Seller”) warrants to the original purchaser only, that all WEN con- sumer power tools will be free from defects in material or workmanship for a period of two (2) years from date of purchase.
- Page 16 THANKS FOR REMEMBERING...
Need help?
Do you have a question about the WB4723 and is the answer not in the manual?
Questions and answers