SOLTRON M-50 Turbo Plus Operating Instructions Manual

Hide thumbs

page of 88

/ 88
Bookmarks

Quick Links

Download this manual

Soltron

801148 / Index „a" / us / 01.2004

M-50 Turbo Plus

M-55 Turbo Plus

Operating Instructions

Need help?

Do you have a question about the M-50 Turbo Plus and is the answer not in the manual?

Questions and answers

Summary of Contents for SOLTRON M-50 Turbo Plus

Page 1 Soltron Operating Instructions 801148 / Index „a“ / us / 01.2004 M-50 Turbo Plus M-55 Turbo Plus...
Page 2 Identify your tanning device For contact with customer service, please write down the device number of your tanning device. 03479 / 0 Global Service Division #1 Walter Kratz Drive Jonesboro, Arkansas 72401 ( (800) 445 0624...
Page 3 Note: Description of skin types see Page 14. 03731 / 0 “This product is in conformity with performance standards for sunlamp products under CFR21 Part 1040.”...
Page 4 Foreword Dear Customer, The Soltron device you have purchased is a technically advanced and • Read and observe the information in this instruction manual. This will powerful microcomputer control system. Your device was manufactured enable you to prevent accidents and provide you with a reliable with the greatest care and precision.
Page 5 Table Of Contents Intended use ..........5 Regulating face tanner .
Page 6 Table Of Contents Cleaning/replacing UV high-pressure lamps/filter Timer operation ....see separate manual panels in side section ........53 Cleaning/replacing UV high-pressure lamps/filter panels in canopy .
Page 7 Safety Safety Description of warning signs Caution notes, property damage: CAUTION! Danger notes, damage to persons: The word “CAUTION” with this label points out that danger for devices, materials and the environment can be expected Type and source of danger, e.g. “DANGER – High here.
Page 8 Intended use Intended use Danger of damage to persons The tanning device is intended exclusively for cosmetic tanning of the hu- man skin: DANGER – High voltage! • This device is used for tanning one adult person at a time. DANGER! You can be killed or injured by an electric shock! •...
Page 9 Danger of damage to persons Warning – ultraviolet radiation! Warning – ultraviolet radiation! WARNING! WARNING! As with natural sunlight, overexposure can cause eye Danger of long-term consequences. and skin injury and allergic reactions. Repeated expo- – Nursing infants and small children through age sure may cause premature aging of the skin and skin 7 years may not use this device.
Page 10 Please read and observe ... Meaning of symbols Symbols for Description, Operation and Maintenance General Symbols General Symbols Inform Customer Service Filter panels Soltron key Cleaning and disinfectant agents Do not touch, hot surface! Part/article number (for orders) Operation Low-pressure lamp(s) UV low-pressure lamp(s)
Page 11 Please read and observe ... Display of Music Channel 1 (Channel 1) Factory setting: 1 channel Loudspeaker Customer service can set up to 7 channels Display when adjusting volume Headphone connection Description Technical data Effect lighting Maintenance Body cooling by Caution, safety switch! AQUA SOLAR WITH SKIN ADDITIVE...
Page 12 Please read and observe ... Replacing Presettings Clean or replace depending on soiling Display Draining Troubleshooting Visual inspection Air Condition Filter/filter mat Continuation of work steps on next page End of work step...
Page 13 Please read and observe ... Guidelines Equipment This device was built according to UL STD 482, certified to CAN/CSA The equipment of the devices differs depending on the model. STD C22.2 2 No. 224. In this instruction manual all standard and optional components/functions are taken into account which must be observed during operation and/or CAUTION –...
Page 14 Please read and observe ... Product information Maintenance and care Acrylic glass panels Extreme danger! High voltage! The acrylic glass panels for the tanning devices are produced of acrylic glass developed especially for this application. The acrylics used are char- DANGER! During maintenance work there is a danger of touching acterized by a particularly high UV permeability and resistance, as well as...
Page 15 Please read and observe ... Cleaning Acrylic glass surfaces CAUTION! Do not rub with a dry cloth – danger of scratching! For fast, hygienic proper cleaning of acrylic glass surfaces, use the specially developed fast disinfectant cleaner Anti- ® fect Concentrated disinfectants or solvents (e.g.
Page 16 Please read and observe ... Environmental protection information General tanning instructions Who can get a tan? Environmental Declaration – The JK Corporate Group Anyone who also gets a tan in natural sunlight. Persons with sensitive The JK corporate group is subject to the strict regulations of EC Directive skin even tan more pleasantly and with fewer worries, as the radiation 761/2001 and the standard DIN ISO 14001, and undergoes regular inter- dosage can be exactly defined with sunbeds.
Page 17 Please read and observe ... Note: our sunbeds only contains extremely small quantities of comparable rays, making this kind of protection unnecessary. On the contrary, the The tan produced by the tanning unit is a deep, rich “Cosmet- skin should be thoroughly cleaned and dried before each sunbath. Many ic”...
Page 18 Please read and observe ...
Page 19 M-55 Turbo Plus 04004 / 0...
Page 20 Accessories 03609 / 0...
Page 21 Tanning Start and end of tanning If the device fails to start up when you have closed the canopy: The device is started automatically with an internal or external timer and – Press START/STOP to start tanning. automatically stopped after the preselected time. The fan continues to run for approx.
Page 22 Settings during start-up To interrupt tanning session 03611 / 0 03999 / 0 The tanning time can be interrupted during tanning by switching off the UV lamps: – Press START/STOP for three (3) seconds to pause or stop tanning. – Press START/STOP again for three (3) seconds to restart the lamps.
Page 23 IR function Running time of accent lights The accent lights are automatically switched on at the end of the tanning time after the set operating time and are switched off again at the beginning of the next tanning session. The running time of the accent lights in the Standby mode can be changed with the presettings –...
Page 24 Face tanner Press for two (2) seconds. 03616 / 0 03618 / 0 03617 / 0 One (1) minute delay. Switching the face tanner OFF: – Press button for two (2) seconds. Switching on face tanner again: – Press button again.
Page 25 Press for Shoulder tanner two (2) seconds. 03619 / 0 03621 / 0 Switching the shoulder tanner OFF: – Press button – While the button flashes, press the minus button for two (2) seconds to switch the shoulder tanner off. Switching the shoulder tanner on again: –...
Page 26 Press for Air condition two (2) seconds. 03882 / 0 03882 / 0 03883 / 0 During start-up the air condition is active. Three (3) minutes delay. Switching the air condition OFF: – Press button – While the button flashes, press the minus button for two (2) seconds to switch the air condition off.
Page 27 Surround cooling body ventilator – Adjust speed 03622 / 0 03622 / 0 – Press button While the button flashes, press the plus or minus button to change the intensity of the air stream. 03623 / 0...
Page 28 Surround cooling head nozzles – Adjust speed 03624 / 0 03624 / 0 – Press button – While the button flashes, press the plus or minus button to change the intensity of the air stream. 03625 / 0...
Page 29 Press for AROMA DREAM or ENERGY two (2) (example: DREAM) seconds. 03627 / 0 03988 / 0 03627 / 0 Activate the AROMA system: Deactivate the AROMA system: The AROMA VITALIZER system includes aromas with the scents “Dream” and “Energy”, –...
Page 30 VITALIZER body nozzle 03627 / 0 03631/ 0 Press for The VITALIZER function sprays a fine mist of two (2) AQUA SOLAR WITH SKIN ADDITIVE in the seconds. interior of the sunbed for body cooling. Activating the Vitalizer body function: –...
Page 31 VITALIZER head nozzle 03634 / 0 03627 / 0 Press for The VITALIZER function sprays a fine mist of two (2) AQUA SOLAR WITH SKIN ADDITIVE in the seconds. interior of the sunbed for face cooling. Activating the Vitalizer head function: –...
Page 32 Channel Press to activate. 03612 / 0 03612 / 0 03612 / 0 – Press button – While the button flashes, press the plus or minus button to select a channel. means: no Channel selected, there is no sound, music is “OFF”. 03612 / 0 03612 / 0...
Page 33 Volume Press to activate. 03612 / 0 03612 / 0 03612 / 0 – Press button – While the button flashes, press the plus or minus button to change the volume. 03612 / 0...
Page 34 Technical data Soltron M-50 Soltron M-55 Model: Model: Turbo Plus Turbo Plus 12,600W Rated power consumption: 12,100W Rated power consumption: 13,700W Rated voltage: 230 V Rated voltage: 230 V Rated frequency: 60 Hz Rated frequency: 60 Hz 50 amp 3-pole...
Page 35 Powerinput 3-pole Powerinput 1-pole (max. 90 amp) (max. 50 amp) 230V AC 60 Hz 230V AC 60 Hz 04045 / 1...
Page 36 Bed tolerance in room Maximum permissible load A = 65.75 in B = 52.36 in C = 51.97 in D = 80.31 in E1 = 88.19 in E2 = 92.13 in F = 31.50 in 03638 / 0 03604 / 0 Warning –...
Page 37 Scheduled maintenance – filters, AROMA, VITALIZER 51 937 /50 h 800 601 51 975 800 278 80 – 300 h 1.6 gal 365 1803 300 h 100 ml a) Dream: 365 1703 b) Energy: 365 1603 c) Cabin: 365 1503...
Page 38 Scheduled maintenance – accent lights ▲ 12408 white 13 W white 30 W ▲ 12263 blue 30 W ▲ 12377 ▲ 10047 a) b) 03641 / 0...
Page 39 ▲ 10012 f) g) h) 43 x ▲ 10047 The UV high-pressure lamps used, Soltron 500 W (face tanner), are broadband radiators that can be operated with different wattages (approx. 240-520 W). UV low-pressure lamps: Clean with plain water (damp cloth).
Page 40 ▲ 10012 f) g) h) 46 x ▲ 10047 The UV high-pressure lamps used, Soltron 500 W (face tanner), are broadband radiators that can be operated with different wattages (approx. 240-520 W). UV low-pressure lamps: Clean with plain water (damp cloth).
Page 41 3,000 h 770 911 800 666 702 609 53, 56 (Soltron 2) Filter panels: Clean with plain water (damp cloth).
Page 42 Relamping / maintencance instructions It is imperative that you, the owner and/or operator, check all compon- ents for any signs of wear which may occur through normal use. Danger of burns from hot lamps and device parts – Observe the cleaning and maintenance schedule specified in the maintenance table on Page 37 to 42.
Page 43 UV low-pressure lamps, lower section 03644 / 0 03646 / 0 03648 / 0 De-energize device! 03645 / 0 03647 / 0 03098 / 0...
Page 44 03099 / 0 Close: 03649 / 0...
Page 45 UV low-pressure lamps, shoulder tanner 03646 / 0 03652 / 0 03650 / 0 De-energize device! 03645 / 0 03651/ 0 03653 / 0...
Page 46 Close: 03649 / 0 03108 / 0 03099 / 0...
Page 47 UV low-pressure lamps, side section 03099 / 0 03655 / 0 03657 / 0 Close: De-energize device! 03656 / 0 03108 / 0 03664 / 0...
Page 48 UV low-pressure lamps, canopy De-energize device! 1 2 3 03108 / 0 03658 / 0 03659 / 0 Danger of injury from the canopy panel! WARNING! The canopy panel is heavy and falls down by itself after uns- crewing the 3 screws. –...
Page 49 03099 / 0 Close: 1 2 3 03661 / 0...
Page 50 Interior lighting, canopy De-energize device! 1 2 3 03347 / 0 03662 / 0 03659 / 0 Danger of injury from the canopy panel! WARNING! The canopy panel is heavy and falls down by itself after uns- crewing the 3 screws. –...
Page 51 03099 / 0 Close: 1 2 3 03661 / 0...
Page 52 UV high-pressure lamps, side section 03663 / 0 03657 / 0 04287 / 0 De-energize device! 04286 / 0 03896 / 0 03656 / 0...
Page 53 – Check safety switch: CAUTION! Do not touch the glass bulbs of the UV high-pressure lamps with your bare fingers! Remove soiling thor- oughly. – Only touch new UV high-pressure lamp with a cloth – see Figure 8. 03899 / 0 02757 / 0 03897 / 0 03898 / 0...
Page 54 Close: 04288 / 0 03664 / 0 03901 / 0...
Page 55 UV high-pressure lamps, canopy De-energize device! 1 2 3 04286 / 0 03665 / 0 03659 / 0 Danger of injury from the canopy panel! WARNING! The canopy panel is heavy and falls down by itself after uns- crewing the 3 screws. –...
Page 56 03896 / 0 03897 / 0 03898 / 0 – Check safety switch: CAUTION! Do not touch the glass bulbs of the UV high-pressure lamps with your bare fingers! Remove soiling thor- oughly. – Only touch new UV high-pressure lamp with a cloth –...
Page 57 03901 / 0 03699 / 0 Close: 1 2 3 04288 / 0 03661 / 0...
Page 58 Accent lights, canopy 03666 / 0 03668 / 0 03099 / 0 De-energize device! 03667 / 0 03350 / 0 03669 / 0...
Page 59 M-55 Turbo Plus: Accent lights, front panel 03670 / 0 03672 / 0 De-energize device! 03671 / 0 03099 / 0...
Page 60 Lower section, filter Hand-wipe lightly, dry or with water, or use a vacuum cleaner. 03673 / 0 03674 / 0 03319 / 0 De-energize device! 03645 / 0 03675 / 1 03676 / 1...
Page 61 03677 / 0 Close: 03649 / 0...
Page 62 Canopy, filter mats Rinse with water or replace. 03678 / 0 04047 / 0 04059 / 0 03679 / 0...
Page 63 Shoulder tanner, filter mats 03650 / 0 03646 / 0 03652 / 0 De-energize device! 03645 / 0 03651/ 0 03653 / 0...
Page 64 03680 / 0 04061 / 0 Rinse with water or replace. Close: 04047 / 0 03677 / 0...
Page 65 Air Condition, condensate and filter mats Clean carefully (vacuum or wash) or replace. 03681 / 0 03674 / 0 03244 / 0 De-energize device! 03645 / 0 04043 / 0...
Page 66 03677 / 0 Close: 03649 / 0...
Page 67 Lower section, AROMA 03682 / 0 03674 / 0 03354 / 0 De-energize device! – Match colors of labels. 03645 / 0 03246 / 0 03355 / 0...
Page 68 03677 / 0 Close: 03649 / 0...
Page 69 04005 / 0 De-energize device! Health hazard! WARNING! Impurities in the VITALIZER can present a health hazard. – Use only original Soltron VITALIZER! – Replace the entire canister. – Do not top up or mix with tap water or other liquids! –...
Page 70 VITALIZER, Venting after canister replacing Note: For venting after canister replace- ment you must enter presetting mode and choose function 18 (see Page 79). 03677 / 0 04033 / 1 Close: 03649 / 0 04036 / 1...
Page 71 04037 / 0 30 sec 04039 / 0...
Page 72 Changing presettings with the control panel Changing presettings The setting mode enables you to call up operating states and make alte- rations to current settings. Increase the preset value: Changing to Presetting mode • Press and hold the START/STOP button while simultaneously pres- sing the + button.
Page 73 Defining a code • Select Function • Press the START/STOP button for 3 seconds until appears. • Press the desired buttons consecutively: • Press the buttons in the same sequence when appears again. • appears in the display. The set code has been saved. •...
Page 74 This code is independent of the access code for the preset- 04002 / 0 tings via the control panel. Note: Please read the operating manual for the Soltron software for instructions on how to display or change data with a hand-held unit.
Page 75 Description on delivery Values from-to 0 → 9999 Total number of operating hours Remaining operating time of UV low-pressure lamps (hours) 500 → 0000 Remaining operating time of UV high-pressure lamps (hours) 500 → 0 Remaining operating time of shoulder tanner (hours) 500 →...
Page 76 Description on delivery Values from-to To reset the device to ex-works setting (all functions) To set the access authorisation code to enter setting mode (see Page 74) Adjust volume for music output (Sound System) 7 → 63 Ambient temperature setpoint value (°C) 15 →...
Page 77 Troubleshooting In the case of a fault, fault codes appear on the display to simplify localizing of the fault cause (see separate manual): • If a fault occurs, the fault code flashes in the display. • If several faults occur, the fault messages are displayed alternately. •...
Page 78 Error Meaning Correction Full condensation tank (only when using an original condensate Empty condensation container. container) Fault in condensation pump Temperature sensor for heating (air conditioner) Temperature sensor for cooling (air conditioner) Fault in temperature sensor for UV low-pressure lamps Temperature sensor for room Panel switch for shoulder tanner Air-vane switch does not switch on with fan running...
Page 79 Error Meaning Correction Fault in centre face tanner Fault in face tanner rear Fault in face tanner side section Panel switch on decorative panel on canopy Panel switch of acrylic glass panel on sunbed base/side section Emergency switch-off time exceeded I²C bus fault Switching error in series circuit of safety switch Auxiliary controller...
Page 80 Error Meaning Correction Face tanner controller Speed control 1 Speed control 2 Audio amplifier Channel selection Real-time clock Parameter memory Incorrect equipment of controller...
Page 81 Index Index Accent lights De-energizing device ........36 Hand-held unit, changing presettings..75 Operation ........... 22 Disposal of lamps........13 Replacing ........... 59 Intended use..........5 Accent lights front panel, replacing..... 60 Equipment........... 10 Interior lighting..........51 Acrylic glass panels ........11 Error codes..........78 Air condition, Condensate, filter mat...
Page 82 VITALIZER Replacing ..........9 Operation........29, 30 Safety switch ........8 Relamping instructions, general ....43 Replacing canister ......70 Soltron key ........... 7 Room temperature, maximum ....35 Voltage ............33 Starter........... 7 Volume, operation ........32 Visual inspection ........9 Safety information........II, 5 Settings at start...........
Page 83 Soltron – Limited Warranty Soltron warrants its products to be free from defects in materials and If the warranty card is not registered, proof of purchase from Soltron or workmanship under intended normal use as described in the unit's Oper-...
Page 84 Warranty Limited Acrylic Warranty Soltron warrants its acrylic sheets to be free from defects in material and Global Service Division workmanship, under intended normal use, for a period of one (1) year #1 Walter Kratz Drive from date of sale of the tanning bed. Due to the tanning lotions, cosmet-...
Page 85 2. Soltron Service Department determines course of action. Soltron is supported nationwide by an extensive dealer/distributor net- 3. Soltron ships part and R.A.I. to customer freight collect and bills cus- work through whom the majority of our units are sold. These dealers/dis- tomer on net30 basis for part only.
Page 86 Labor Warranty Claim/Credit Procedures tion or repair. Soltron furnishes labor without charge for a period of 90 days from date This warranty is not transferable and is only applicable to the original pur- of purchase. All labor and related charges must be authorized by Soltron...
Page 88 Soltron Inc. Business centre, 2950 Xenium Lane North, Suite # 150 – Plymouth MN 55447, Indiana Phone: 1-866-243-9861 www.soltron.us ● ● ●...

This manual is also suitable for:

M-55 turbo plus