Advertisement
Quick Links
Advertisement
Related Manuals for NETGEAR WAX610Y
Summary of Contents for NETGEAR WAX610Y
- Page 1 Installation Guide Insight Managed WiFi 6 AX1800 Outdoor Dual Band Access Point Model WAX610Y...
- Page 2 PoE+ switch. WARNING: If you use a PoE+ switch that is located indoors, you must use a PoE+ Ethernet surge protector on the cable from the switch to the WAX610Y access point located outdoors. CAUTION: Terms of Use This device must be professionally installed.
- Page 3 Overview Bottom view with cover removed LAN/PoE+ port Reset button Right side view Power/Cloud LED LAN LED 2.4 GHz WLAN LED 5 GHz WLAN LED...
- Page 4 1. Connect to power and the Internet Power up the WAX610Y access point (AP) by connecting the LAN/PoE+ port to a PoE+ switch that supplies 802.3at (PoE+) power. The LAN/PoE+ port is on the bottom behind the cover. If needed, obtain a PoE+ Ethernet surge protector.
- Page 5 If connected to 2.5 Gbps equipment, the WAX610Y LAN/PoE+ port supports Ethernet speeds up to 2.5 Gbps within your LAN. The preceding figures show a NETGEAR MS510TXUP switch, which supports speeds of 2.5 Gbps and higher, as well as PoE+. If your Internet connection, modem, router, and switch support a speed of 2.5 Gbps, the...
- Page 6 Enter the email address and password for your NETGEAR account and click the NETGEAR Sign In button. If you do not already have a NETGEAR account, you can create an account now. Only if you are an Insight Pro user, select the organization to which you want to add the AP.
- Page 7 The default WiFi passphrase is sharedsecret. Open the NETGEAR Insight app. If you do not already have a NETGEAR account, you can create an account now. Enter the email address and password for your account and tap LOG IN.
- Page 8 From a computer or mobile device that is connected to the Internet, visit my.netgear.com. Log in to your NETGEAR account. If you do not already have a NETGEAR account, you can create an account now. The My Products page displays.
- Page 9 Mount to a wall CAUTION: Make sure that the wall is not damaged. The back of the AP provides two holes for wall mounting. The arrows in the figure show the holes. Using the screw placement guide, mark the location for the holes on the wall where you want to mount the AP.
- Page 10 Mount to a pole The back of the AP provides openings for the pole mounting strap. The arrows in the figure show the middle opening. Using a screwdriver, open the supplied pole-mounting strap. Insert the strap through one of the openings on the back of the AP.
- Page 11 Support and Community Visit netgear.com/support to get your questions answered and access the latest downloads. You can also check out our NETGEAR Community for helpful advice at community. netgear.com. Regulatory and Legal Si ce produit est vendu au Canada, vous pouvez accéder à ce document en français canadien à...
Need help?
Do you have a question about the WAX610Y and is the answer not in the manual?
Questions and answers