Page 2
The warranty does not cover damages or defects in the finish once it has been installed. Blu Bathworks’ responsibility for shipping damages ceases upon delivery of the product in good order to the carrier. All complaints regarding damage due to transport must be made directly to the carrier.
Page 3
Cleaners for Fittings and Accessories To avoid damaging the surface and working components of the fittings, certain precautions must be taken in terms of usage and subsequent cleaning as many cleaning agents contain acids for general cleaning and removing calcium deposits. When caring for your fittings and accessories, please note the following: - Only apply cleaners which are expressly intended for the use - Never use any cleaner containing hydrochloric acid, formic acid or acetic acid on or near the fitting, as they can...
Page 4
Installation Instructions for Back to Wall Bidet LB9010 PREPARATION • Turn-off water supply and if necessary remove old bidet. • Install or relocate the supply tubing and waste pipe to the specified rough-in dimension. • It is recommended that the faucet and waste be assembled and installed prior to the installation of the bidet.
Page 5
Installation Instructions for Wall-mount Bidet LB9020 · LB9030 PREPARATION • Turn-off water supply and if necessary remove old bidet. • Install or relocate the supply tubing and waste pipe to the specified rough-in dimension. • It is recommended that the faucet and waste be assembled and installed prior to the installation of the bidet. Refer to the Geberit carrier installation and maintenance instructions prior to the installation of these products.
Page 6
(5) years from the date of purchase. Blu will, at its election, repair, provide a replacement part or product, or make appropriate adjustment, subject to the terms and conditions set forth in this warranty. Blu Bathworks ®...
Need help?
Do you have a question about the LB9010 and is the answer not in the manual?
Questions and answers