Download Print this page

Securikey MICRO VAULT Operating

Advertisement

Quick Links

Operating the
MICRO VAULT Lock
Initially the keypad may not have batteries fitted. If so
open the safe using the Key Override procedure
detailed below.
Once the door is open load 4pcs 1.5V AA Alkaline
batteries into the battery compartment.
The safe will acknowledge with a short melody and at
the same time the LED screen displays "GOOD".
IMPORTANT.
Default user codes must be changed immediately
upon safe installation.
How do I open my safe?
The safe will be pre-set with two user codes:
User 1 code: 1 2 3 4
User 2 code: 1 2 3 4 5 6
The lock must be activated by first pressing "#".
o
Enter one of the set codes followed with "#".
o
o
The lock will release and give a short melody.
The keypad displays "OPEN".
o
o
Rotate the chrome element of the lock keypad
clockwise and pull the door open.
How do I lock my safe?
Close the door and rotate the dial anti-clockwise to
activate the door bolts. The door will be locked
securely.
How to change user codes?
Once a user code is changed it MUST tested for
satisfactory operation 3 times with the door in the
open position.
Securikey Limited, PO Box 18, Aldershot, Hampshire GU12 4SL. Telephone: 01252 311888 Facsimile: 01252 343950
Email: enquiries@securikey.co.uk http://www.securikey.co.uk
Changing User 1 code using reset button
o
Press the red button on the door edge inside
the safe.
o
The lock will beep and the keypad displays "
Input a new code of 1- 6 digits and press "#".
o
o
The lock will emit a short melody and the
keypad displays "IN" followed by the newly
entered User 1 code.
Changing User 1 code via keypad
Press "#" on the keypad and input your user
o
code.
Press "#" to receive a short melody.
o
The keypad displays "OPEN".
o
Press " " to receive a beep.
o
The keypad displays "
o
Input a new code of 1 - 6 digits and press "#".
o
o
The lock will emit a short melody and the
keypad displays "IN" followed by the newly
entered User 1 code.
Changing User 2 code using reset button
Press "#" on the keypad and you will hear a
o
beep and the keypad displays "
Input "00".
o
o
Press the red button on door edge inside safe.
o
The lock will beep and the keypad displays "
Input a new code of 1-6 digits and press "#".
o
o
The lock will emit a short melody and the
keypad displays "IN" followed by the newly
entered User 2 code.
Changing User 2 code via the keypad
Press "#" on the keypad and input your user
o
code.
Press "#" to receive a short melody.
o
The keypad displays "OPEN".
o
Press " " to receive a beep.
o
The keypad displays "
o
Input a new code of 1 - 6 digits and press "#".
o
o
The lock will emit a short melody and the
screen display "IN" followed by the newly
entered User 2 code.
-
".
".
-
-
".
-
".
".
-

Advertisement

loading
Need help?

Need help?

Do you have a question about the MICRO VAULT and is the answer not in the manual?

Questions and answers

Summary of Contents for Securikey MICRO VAULT

  • Page 1 How to change user codes? Once a user code is changed it MUST tested for satisfactory operation 3 times with the door in the open position. Securikey Limited, PO Box 18, Aldershot, Hampshire GU12 4SL. Telephone: 01252 311888 Facsimile: 01252 343950 Email: enquiries@securikey.co.uk http://www.securikey.co.uk...
  • Page 2 Input your user code which now will be shown as “000000”. Note: The default setting with the lock opened from standby is ‘user code’ displayed. Securikey Limited, PO Box 18, Aldershot, Hampshire GU12 4SL. Telephone: 01252 311888 Facsimile: 01252 343950 Email: enquiries@securikey.co.uk http://www.securikey.co.uk...