Related Manuals for Securikey LA GARD 702 Display
Summary of Contents for Securikey LA GARD 702 Display
- Page 1 LA GARD 702 Display High Security Lock for Safes & Vaults Advanced User Instructions Keypad firmware 1.2.3.4, Lock firmware 1.2.2.3 (v1)
- Page 2 Introduction Command menu These instructions outline advanced procedures for To access the command menu: operating locks using the Master code and should be used • Press either Arrow Up, Arrow Down or Enter in conjunction with the document Standard User Instructions, which is available to download from our website.
- Page 3 Specify alarm input setting Add the Manager Master Master With connection to an alarm system and peripheral Generally, the Manager code can be Reset rather than equipment sold separately, an alarm input signal can alter being deleted. If the Manager has been deleted, it can be the lock’s operation with one of the settings below: added again or assigned to a different ID.
- Page 4 Disable or re-enable the Manager Command menu structure Master A Manager code can be temporarily disabled and then re- Master Manager User enabled later. Open Lock ü ü Command Menu >Users >Edit >Enter the ID to be ü ü ü Change combo changed ü...
Need help?
Do you have a question about the LA GARD 702 Display and is the answer not in the manual?
Questions and answers