Securikey LA GARD 702 Display User Instructions

Available users and default codes

When supplied by Safelock Systems, locks are setup so
that ID 01 is assigned a Manager profile with a code which
is valid to open the lock immediately.
As supplied by Safelock Systems Limited:
ID Profile
00 Master
01 Manager
02-29 Users
Warning: Default codes must be changed immediately.
The Master has overall administrative control of the lock
system and therefore can create other users who can
Open The Lock.
User hierarchy
As supplied by Safelock Systems:
Master (00)
Manager (01)
Users (02-29)
LA GARD 702 Display
High Security Lock for Safes & Vaults
Standard User Instructions
Keypad firmware 1.2.3.4, Lock firmware 1.2.2.3 (v1)
(ID) Default Code
(0-0)-8-7-6-5-4-3-2-1
(0-1)-1-2-3-4-5-6
Deleted – Can be added by the
Master or Manager

User permissions

Profile Permission
• Full control of the lock and other users
Master
• Cannot open directly
Manager • Open lock, Change own code
• Manage users (Add, delete, disable, enable,
reset)
• Manage time delay values
• Activate PC link for audit
• Set date and time
• Turn backlit buttons and keypad beeps off or
on
• Override time delay (If profiled)
User • Open lock, Change own code
• Override time delay (If profiled)
• Activate PC link for audit
Code length
The Master code always contains ID 00 + 8-digits. Other
user codes contain the 2-digit ID + 6-digits by default but
can be changed so that 6-9 digits are used.

Buttons

Key Use
Arrow Up or Arrow Down: To scroll through
menus
#: To go back a step in a menu, or cancel a code
entry
Enter: To select a menu item or confirm an
entry