Elo TouchSystems Pay M100 Quick Installation Manual

Contents:
• 1 x Fingerprint Reader
• 2 x Pan Head screws: M2.5 x 4mm long
• 2 x Plugs: two same plugs, black
Learn more about Elo at EloTouch.com
America
Asia Pacific
Tel +1 408 597 8000
Tel +86 (21) 3329 1385
EloSales.NA@elotouch.com
EloAsia@elotouch.com
Europe (EMEA)
Tel +32 16 930 136
EMEA.sales@elotouch.com
The information in this document is subject to change without notice.
Elo Touch Solutions, Inc. and its Affiliates (collectively "Elo" ) makes no
representations or warranties with respect to the contents herein, and
specifically disclaims any implied warranties of merchantability or
fitness for a particular purpose. Elo reserves the right to revise this
publication and to make changes from time to time in the content hereof
without obligation of Elo to notify any person of such revisions or
changes.
No part of this publication may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language or
computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise
without prior written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of
Elo Touch Solutions, Inc.
© 2024 Elo Touch Solutions, Inc. All rights reserved.
Elo Touch Solutions,Inc.
670N. McCarthy Blvd. Suite 100
Milpitas,CA 95035
EU Importer: Elo Touch Solutions,Inc.
EU Contact : Elo Touch Solutions
NV Winggepark5B/301 3110 Rotselaar,Belgium
Brand name : Elo
CAN ICES-3(B)/NMB-3(B)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
"Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment" .
Quick Installation Guide
Elo Pay M100
Fingerprint Reader
Revision A
P/N QIG600271
www.EloTouch.com