Advertisement
Quick Links
KRATOS-BIA HINGED GRAB BAR with SafetyGrip®
KBSG775
Safety Information
WARNING: ENTRAPMENT HAZARD. Entrapment
of head, neck, limb or torso can occur in gaps
between the Pole and furniture and/or fixtures.
Entrapment could result in death or serious injury.
When positioning the Hinged Grab Bar, ensure the
gap between it and any fixtures and/or furniture
comply with Entrapment Guidelines which state
that gaps must be less than 4.75" (12cm) or
greater than 12" (30cm).
IMPORTANT: If you are unsure that you can
install this product correctly, hire a qualified
professional.
Assembly/Installation Instructions
Tools Required
•
Safety Glasses
•
Power Drill.
•
5/32 inch drill bit for pilot holes for the wood
screws.
•
Philips screw driver.
•
Pencil
If you have any questions, please contact Customer Care at:
info@SafetyGrip.com. For warranty details, please visit
https://SafetyGrip.com/customer-care/#warranty.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HartMobility KBSG775
Summary of Contents for HartMobility KBSG775
- Page 1 Assembly/Installation Instructions KRATOS-BIA HINGED GRAB BAR with SafetyGrip® KBSG775 Safety Information Tools Required WARNING: ENTRAPMENT HAZARD. Entrapment • Safety Glasses of head, neck, limb or torso can occur in gaps • Power Drill. between the Pole and furniture and/or fixtures.
- Page 2 KIT CONTENTS Page 2 | KRATOS-BIA HINGED GRAB BAR with SafetyGrip® KBSG775...
- Page 3 350lbs (158kg). It is not designed or intended to take the full weight of the user. • For heavy use or higher weight capacity we recommend that two KBSG775 are used, one on either side of the user. •...
- Page 4 Now you can decide how high that you want the Hinged Grab Bar to be from the floor. The top arm should be a comfortable height for the user when they are standing. Page 4 | KRATOS-BIA HINGED GRAB BAR with SafetyGrip® KBSG775...
- Page 5 STEP 4: Install the Hinged Grab Bar Securely and correctly install according to your mounting choice. STEP 5 • In these positions we also show our Atlas-Toilevator and Atlas-Toilevator HD, which will raise your toilet seat to the ADA recommended height, very discreetly. These products also make it easier to sit onto and get up from the toilet.
- Page 6 This installation can loosen with use. Check and tighten weekly. • The Friction Hinge on the KBSG775 can loosen after some use. Use the Hex Key provided to tighten the friction hinge adjusting screws, one each side of the hinge, until it moves smoothly and stays up where you want it.
Need help?
Do you have a question about the KBSG775 and is the answer not in the manual?
Questions and answers