Download Print this page

HartMobility Arcorail Installation Instructions & Schematics

Home bedside balance assist rail

Advertisement

Quick Links

AR250 Arcorail
Installation Instructions
& Schematics

Advertisement

loading

Summary of Contents for HartMobility Arcorail

  • Page 1 AR250 Arcorail Installation Instructions & Schematics...
  • Page 2 AR 250 ARCORAIL for HOME STYLE BED AR250 ARCORAIL FOR HOME STYLE BEDS WA R N I N G & C A U T I O N S • Please read these Instructions carefully before installing and using your ArcoRail. Please read the Warning and Caution labels attached to the ArcoRail product. Incorrect Installation or incorrect use of ArcoRail can result in serious injury or death. • The ArcoRail is an Bedside Balance Assist and must not be used for any other purpose. ArcoRail is to assist people in moving in REPLACE THIS WITH NEW W...
  • Page 3: Maintenance

    Try moving the horizontal bar BASE from side to side to make sure that the ArcoRail is locked into the new position. 2. Entering and Exiting the bed. To enter or exit the bed hold onto both the vertical bar and the horizontal bar. It will be easier if you sit on the bed beside the ArcoRail away from the head of the bed. 3. Using the ArcoRail to sit up or reposition on the bed. The ArcoRail can be used to sit up, move, reposition or lay down on the bed. Swivel the ArcoRail to the most comfortable position for you and grab it to assist you when you are moving. 4. Maintenance: • Regular maintenance and cleaning will improve the safety and durability of your ArcoRail. • Periodically make sure that all the bolts are tight. • Always make sure that the mattress is tight against the vertical post.
  • Page 4: Box Contents

    ANGLE IRON FRAMES that are (1“ - 1-3/4”) IN HEIGHT horizontal and flat at the bottom. Please read the following instructions before you start to assemble the Arcorail bedside handrail. This document contains important safety information. Box Contents Item Qty. Description HANDLE Use 5/32”...
  • Page 5 Pick Post Length & Handle Configuration Pick Post Length & Handle Configuration SHORT POST ( LONG POST ( MEDIUM POST ( LONG POST ( ) WITH HANDLE ATTACHMENT SHORT POST ( LONG POST ( MEDIUM POST ( LONG POST ( ) WITH ) REMOVED HANDLE ATTACHMENT...
  • Page 6 Pre-Assemble These Parts All moving parts must be pre-fastened snugly and easily adjusted by hand. INSTALLATION TIP: Make sure that the snap buttons in part H are in the respective holes. INSTALLATION TIP: Note: Two connector tubes (H) replace AR18 Put the Post in place now Select Installation Position Mark the bed frame 36”...
  • Page 7 Fitting Arcorail Base to Frame Put the ANCHOR ASSEMBLY under the bed frame 36” from the head of the bed. 36” Hook anchor handle into onto bed frame rail as shown Take opposite end and hook it onto the bed frame.
  • Page 8 Tightening Arcorail Base to Frame Tightening Arcorail Base to Frame Ensure all parts are attached firmly (to simulate one solid part) and install in numeric Ensure all parts are attached firmly (to simulate one solid part) and install in numeric order as shown.
  • Page 9: Safety Check

    Safety-Check: Set height of Arcorail for safety (do not allow a gap greater than 3 inches (75mm) – see below for important details) and check to ensure all bolts and parts are firmly fastened before placing mattresses onto the bed frame and periodically tighten as required.
  • Page 10 We don’t bite, so contact us. info@hartmobility.com www.hartmobility.com 1(800) 998-0774...

This manual is also suitable for:

Ar250