Advertisement
Total Back + Shoulder Shiatsu Cushion with Heat
The actual product materials and fabrics may vary from the picture shown.
Power Button
To turn on the massage functions, first press the POWER button. The L.E.D. indicator will illuminate and confirm your selection. To turn off the massage functions, simply press the button again. The L.E.D. indicator will blink while the massage mechanism returns to its lowest point and then it will turn off.
Kneading Massage
Kneading is a deep massage.
Kneading Programs
Choose from 4 preset programs where the Kneading massage travels up and down in a specific area of the back. To select a program, simply press the button and the L.E.D. will illuminate. To deselect, press the button again or press another button.
Spot Massage Feature
While the unit is in Kneading massage, press either button to stop and focus the massage action in one place. Once the feature is operating, you may adjust the mechanism position by holding down either button until the desired position is reached. The Up Arrow will move the mechanism upwards and the Down Arrow will move it down. Once you release the button, the mechanism will stop in that place.
Demo Button
For a brief demonstration of the features of the Massage Cushion, press the Demo button. The unit will briefly go through each function. Once completed, the unit automatically turns off. The L.E.D. light will blink to indicate active function.
Rolling Massage
Rolling is like two hands working slowly up and down your back.
Rolling Programs
Choose from 4 preset programs where the Rolling massage travels up and down in a specific area of the back. To select a program, simply press the button and the L.E.D. will illuminate. To deselect, press the button again or press another button.
Width Adjustment
While the unit is in Rolling massage, press this button to adjust the distance or width between the massage heads. With each press, the massage heads will move to the next available position.
Heat Button
For soothing heat, when massage is on, simply press the heat button and the corresponding red L.E.D. light will illuminate. To deselect, press the button again and the corresponding L.E.D. light will turn off. For your safety, heat cannot be turned on if no massage program is selected.
NOTE: There is a 15-minute auto shut off on the unit for your safety.
NOTE: When "POWER" button is pressed for first-time use, the moving mechanism will automatically move to the lowest position before starting a massage program. After initial use, mechanism will always park at lowest position. See note below regarding parking.
NOTE: The moving massage mechanism always "parks" or finishes in its lowest position. It will continue to this position after the power has been turned off. If the electrical supply is interrupted, when power is restored, the mechanism will "park" or move to its lowest position.
The Cushion comes with a screw located on the back of the unit to protect the massage mechanism during shipment, which must be removed before the first use to allow the unit to function properly. Use the provided allen wrench. Then, properly dispose of the screw.
Failure to remove screw may cause permanent damage to the massage cushion.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
The cushion includes a removable cover that when used, will customize the intensity of your massage. The cushion may be operated with or without the removable cover. Just use the included Velcro strip at the top of the cover to attach or remove the cover from the cushion.
The Cushion incorporates a unique strapping system which allows you to fasten it to almost any chair. Just slip the straps over the seat or chair and adjust fastening straps to secure. Your massager won't slip or slide away.
Do not use Spot Massage feature with heat in one area for more than 3 minutes.
Note:
There is a 15-minute auto shut off on the unit for your safety.
Note:
Not recommended for use on wooden surfaces as the zipper may damage the wood. Caution is also recommended when using on upholstered furniture.
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed objects which might cut or puncture the fabric surface. To avoid breakage, do not wrap the power cord around the unit. Do not hang the unit by the hand control cord.
Unplug the unit and allow it to cool before cleaning. Clean only with a soft, slightly damp sponge. Never allow water or any other liquids to come into contact with the unit.
Note:
Only gentle force should be exerted against the unit in order to eliminate any/all risk of injury. You may soften massage force by placing a towel between yourself and the unit.
WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS BEFORE USING
TO REDUCE THE RISK OF ELECTRIC SHOCK:
TO REDUCE THE RISK OF BURNS, ELECTRIC SHOCK, FIRE OR INJURY TO PERSONS:
All servicing of this massager must be performed by authorized HoMedics service personnel only.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE OPERATING.
To avoid pinching do not lean on the massage mechanism in the cushion when adjusting your body position.
Do not jam or force any part of your body in the moving massage mechanism.
Register Your Product At: www.homedics.com/register
For more information regarding our product line in the USA, please visit: www.homedics.com
Email: cservice@homedics.com
Monday – Friday
8:30am – 7:00pm (EST )
1.800.466.3342
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the MCS-510H and is the answer not in the manual?
Questions and answers