Advertisement

Quick Links

LT240 User Manual
Copyright Information
Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO.,LTD. All rights reserved. No part of this
publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of
SMARTSAFE.
Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this unit or third parties for
damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident,
misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure
to strictly comply with SMARTSAFE operating and maintenance instructions. SMARTSAFE shall not be
liable for any damages or problems arising from the use of any options or any consumable products
other than those designated as Original SMARTSAFE Products or SMARTSAFE Approved Products by
SMARTSAFE.
All information, specifications and illustrations in this manual are based on the latest information
available at the time of printing. SMARTSAFE reserves the right to make changes at any time without
prior written or oral notice.
Trademark Information
is a registered trademark of SHENZHEN SMARTSAFE TECH CO.,LTD. in China and other
countries. All other SMARTSAFE trademarks, service marks, domain names, logos, and company
names referred to in this manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of SMARTSAFE or are otherwise the property of SMARTSAFE or its
affiliates. In countries where any of the SMARTSAFE trademarks, service marks, domain names, logos
and company names are not registered, SMARTSAFE claims other rights associated with unregistered
trademarks, service marks, domain names, logos, and company names. Other products or company
names referred to in this manual may be trademarks of their respective owners. You may not use any
trademark, service mark, domain name, logo, or company name of SMARTSAFE or any third party
without permission from the owner of the applicable trademark, service mark, domain name, logo, or
company name. You may contact SMARTSAFE by visiting the website at www.newsmartsafe.com, or
writing to SHENZHEN SMARTSAFE TECH CO.,LTD., 3310, Building 11, Tianan Cloud Park, Bantian
Street, Longgang District, Shenzhen, Guangdong, China, to request written permission to use Materials
on this manual for purposes or for all other questions relating to this manual.
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LT240 and is the answer not in the manual?

Questions and answers

Summary of Contents for SmartSafe LT240

  • Page 1 SMARTSAFE. Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with SMARTSAFE operating and maintenance instructions.
  • Page 2: Table Of Contents

    LT240 User Manual Contents 1. Important Safety Instructions ............................1 1.1 Important Notices ................................1 1.2 Qualified Personnel ................................ 1 1.3 Danger Notices ................................1 1.4 Training ..................................2 1.5 Warning Signs ................................2 2. Overvier Of The Lift ................................3 2.1 General Descriptions ..............................3...
  • Page 3: Important Safety Instructions

    1. Important Safety Instructions 1.1 Important Notices SmartSafe will offer one-year's quality warranty for the whole machine , during which any quality problem will be properly solved to the user's satisfaction. However, we will not take any responsibility for whatever bad consequence resulted from improper installation and operation, overload running or unqualified ground condition.
  • Page 4: Training

    LT240 User Manual 1.3.12 Lower the lift to its lowest position and do remember to cut off the power source when service finishes. 1.3.13 Do not modify any parts of the lift without manufacturer’s advice. 1.3.14 If the lift is going to be left unused for a long time, users are required to: a.
  • Page 5: Overvier Of The Lift

    LT240 User Manual 2. Overvier Of The Lift 2.1 General Descriptions This machine composed of posts, carriages, lifting arms, cylinders and motor unit, etc. It is driven by an electro-hydraulic system. The gear pump delivers hydraulic oil to oil cylinders and pushes upwards its piston.
  • Page 6: Installation Instructions

    LT240 User Manual 3. Installation Instructions 3.1 Preparations before installation 3.1.1 Tools and equipments needed  Appropriate lifting equipment  Anti-abrasion hydraulic oil.  Rotary Hammer Drill with 3/4’’ drill bit.  Chalk and tape measure, magnetic plump, 8 metersФ15 level pipe.
  • Page 7 LT240 User Manual 2) Draw an outline of the base plate on the ground with chalk and ascertain the position for the post. Step 5: Erect the posts, power side post first and then the other post. 1) Drill anchor holes for expansion bolts on the ground with an electrical drill. Make sure to drill vertically.
  • Page 8 LT240 User Manual Step7: Mount the power unit onto the power side post. Step 8: Connect oil hoses. Connect the oil hose as per the following diagram. Step9: Install lifting arms. Connect the lifting arms and the carriage by shafts.
  • Page 9: Items To Be Checked After Installation

    LT240 User Manual 80% of the tank’s total volume. 32#anti-abrasion hydraulic oil for winter, 46# for summer. Step11: Trial running. 1) Do refer to the operation instructions in advance and keep in mind that no vehicle left on the lift in the process of trial running.
  • Page 10: Flow Chart For Operation

    LT240 User Manual 3) The machine shall not lift or lower an automobile if its center of gravity is not positioned midway of the lifting arms. Otherwise, we as well as our dealers will not bear any responsibility for any consequence resulted thereby.
  • Page 11: Trouble Shooting

    LT240 User Manual Raise the Lift 1) Make sure that you have read and understood the operation manual before operation. 2) Park the vehicle between two posts. 3) Adjust the lifting arms until they reach the supporting positions of the vehicle and make sure the gravity of vehicle located in the center of four lifting arms.
  • Page 12: Maintenance

    LT240 User Manual Oil level is too low. Add oil. The overflow valve is not adjusted to the right position. Adjust it. The hydraulic oil is too hot ( above 45°). Change the oil. The seal of the cylinder is abraded.
  • Page 13: Monthly Checking Items

    LT240 User Manual  Check the working conditions of safety parts.  Check the amount of oil left in the oil tank. Oil is enough if the carriage can be raised to highest position. Otherwise, oil is insufficient.  Check whether expansion bolts firmly screwed.
  • Page 14: Annex 2: Hydraulic Working System

    LT240 User Manual Annex 2: Hydraulic working system 1. Drive oil cylinder 2. Assistant oil cylinder 3. Manual unloading valve 4. Throttle valve 5. Motor 6. Coupling 7. Gear pump 8. Single –way valve 9. Over-flow valve 10. Anti-surge valve...
  • Page 15: Annex 3: Assembly Drawings

    LT240 User Manual Annex 3: Assembly drawings Name 2D-100 Complete column assembly 2 sets 2D-200 Complete lifting arm assembly 2 sets 2D-300 Complete carriage assembly 2 sets 2D-400 Complete slave oil cylinder 1 set 2D-500 Chain 2 pcs 2D-600 Base plate...
  • Page 16 LT240 User Manual Name 2D-101 Shaft snap ring Ø25 6 pcs 2D-102 Large flat washer Ø25 6 pcs 2D-104 Pulley Ø108*25mm 4 pcs 2D-105 Hex screw M12*25 8 pcs 2D-106 Spring washer Ø 12 8 pcs 2D-107 Flat washer Ø 12...
  • Page 17 LT240 User Manual Name 2D-301 Slider 16 pc 2D-302 Protection rubber pad 2 pc 2D-303 Cross flat head cap screw M8 4 pc 2D-304 Carriage 2 pc 2D-305 Key ring Ø 4*60 4 pc 2D-306 Locking shaft Ø 22 4 pc...
  • Page 18 LT240 User Manual Name 2D-701 Motor 1 pc 2D-702 Overflow valve 1 pc 2D-703 Plug 1 pc 2D-704 Plastic oil tank 1 pc 2D-705 Oil absorbing pipe 1 pc 2D-706 Oil back pipe 1 pc 2DE-403 Solenoid valve 1 pc...
  • Page 19 LT240 User Manual Name 2D-117 Steel cable 2 pcs Name 2D-601 Short oil hose 1 pc 2D-602 Long oil hose 1 pc...
  • Page 20: Warranty

    The exclusive remedy for any automotive meter found to be defective is repair or replacement, and SMARTSAFE shall not be liable for any consequential or incidental damages.

Table of Contents