Advertisement

Quick Links

LT245C USER Manual
Copyright Information
Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO.,LTD. All rights reserved. No part of this
publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of
SMARTSAFE.
Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this unit or third parties for
damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident,
misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure
to strictly comply with SMARTSAFE operating and maintenance instructions. SMARTSAFE shall not be
liable for any damages or problems arising from the use of any options or any consumable products
other than those designated as Original SMARTSAFE Products or SMARTSAFE Approved Products by
SMARTSAFE.
All information, specifications and illustrations in this manual are based on the latest information
available at the time of printing. SMARTSAFE reserves the right to make changes at any time without
prior written or oral notice.
Trademark Information
is a registered trademark of SHENZHEN SMARTSAFE TECH CO.,LTD. in China and other
countries. All other SMARTSAFE trademarks, service marks, domain names, logos, and company
names referred to in this manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of SMARTSAFE or are otherwise the property of SMARTSAFE or its
affiliates. In countries where any of the SMARTSAFE trademarks, service marks, domain names, logos
and company names are not registered, SMARTSAFE claims other rights associated with unregistered
trademarks, service marks, domain names, logos, and company names. Other products or company
names referred to in this manual may be trademarks of their respective owners. You may not use any
trademark, service mark, domain name, logo, or company name of SMARTSAFE or any third party
without permission from the owner of the applicable trademark, service mark, domain name, logo, or
company name. You may contact SMARTSAFE by visiting the website at www.newsmartsafe.com, or
writing to SHENZHEN SMARTSAFE TECH CO.,LTD., 3310, Building 11, Tianan Cloud Park, Bantian
Street, Longgang District, Shenzhen, Guangdong, China, to request written permission to use Materials
on this manual for purposes or for all other questions relating to this manual.
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LT245C and is the answer not in the manual?

Questions and answers

Summary of Contents for SmartSafe LT245C

  • Page 1 SMARTSAFE. Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this unit or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: Accident, misuse, or abuse of this unit, or unauthorized modifications, repairs, or alterations to this unit, or failure to strictly comply with SMARTSAFE operating and maintenance instructions.
  • Page 2: Table Of Contents

    LT245C USER Manual Contents 1. Important Safety Instructions ............................1 1.1 Important Notices ................................1 1.2 Qualified Personnel ................................ 1 1.3 Danger Notices ................................1 1.4 Training ..................................2 1.5 Warning Signs ................................2 2. Overvier Of The Lift ................................3 2.1 General Descriptions ..............................3...
  • Page 3: Important Safety Instructions

    1. Important Safety Instructions 1.1 Important Notices SmartSafe will offer one-year's quality warranty for the whole machine , during which any quality problem will be properly solved to the user's satisfaction. However, we will not take any responsibility for whatever bad consequence resulted from improper installation and operation, overload running or unqualified ground condition.
  • Page 4: Training

    LT245C USER Manual 1.3.12 Lower the lift to its lowest position and do remember to cut off the power source when service finishes. 1.3.13 Do not modify any parts of the lift without manufacturer’s advice. 1.3.14 If the lift is going to be left unused for a long time, users are required to: a.
  • Page 5: Overvier Of The Lift

    LT245C USER Manual 2. Overvier Of The Lift 2.1 General Descriptions This machine composed of posts, carriages, lifting arms, cylinders and motor unit, etc. It is driven by an electro-hydraulic system. The gear pump delivers hydraulic oil to oil cylinders and pushes upwards its piston.
  • Page 6: Installation Instructions

    LT245C USER Manual 3. Installation Instructions 3.1 Preparations before installation 3.1.1 Tools and equipments needed  Appropriate lifting equipment  Anti-abrasion hydraulic oil.  Rotary Hammer Drill with 3/4’’ drill bit.  Chalk and tape measure, magnetic plump, 8 metersФ15 level pipe.
  • Page 7 LT245C USER Manual 2) Draw an outline of the base plate on the ground with chalk and ascertain the position for the post. Step 5: Erect the posts, power side post first and then the other post. 1) Drill anchor holes for expansion bolts on the ground with an electrical drill. Make sure to drill vertically.
  • Page 8 LT245C USER Manual Step 8: Connect oil hoses. Connect the oil hose as per the following diagram. Step9: Install lifting arms. Connect the lifting arms and the carriage by shafts. Install the lifting arms onto the carriages and ensure the arm lock could work.
  • Page 9: Items To Be Checked After Installation

    LT245C USER Manual be engaged.) 3) Check and ensure all the connections are in good condition. 4) No vehicle on the lift during trial running. 3.4 Items to be checked after installation. Check items Are the posts vertical to the floor?
  • Page 10: Flow Chart For Operation

    LT245C USER Manual under the vehicle during lifting and lowering process. 4.2 Flow Chart for Operation Raising Lowering Start Start Press UP button Press UP button to raise the carriage 5cm Motor drives the gear pump work Pull the unlocking steel cable at both sides...
  • Page 11: Trouble Shooting

    LT245C USER Manual 7) Raise the vehicle to the desired height, check it is safe or not, press the “unlocking handle” button to have the safety locks engaged, and then perform maintenance or repair work underneath. Lower the Lift 1) Press the “UP” button on the control box to raise the lifting arms about 5CM which looses the safety lock.
  • Page 12: Maintenance

    LT245C USER Manual 6. Maintenance Easy and low cost routine maintenance can ensure the lift work normally and safely. Following are requirements for routine maintenance. Frequency of routine maintenance is determined by working condition and frequency. THE FOLLOWING PARTS ARE NEEDED TO BE LUBRICATED:...
  • Page 13: Yearly Checking Items

    LT245C USER Manual 6.4 Yearly checking items  Empty the oil tank and check the quality of hydraulic oil.  Wash and clean the oil filter. Note: If users strictly follow the above maintenance requirements, the lift will keep in a good working condition and meanwhile accidents could be avoided to a large extent.
  • Page 14: Annex 2: Hydraulic Working System

    LT245C USER Manual Annex 2: Hydraulic working system 1. Drive oil cylinder 2. Assistant oil cylinder 3. Manual unloading valve 4. Throttle valve 5. Motor 6. Coupling 7. Gear pump 8. Single –way valve 9. Over-flow valve 10. Anti-surge valve 11.
  • Page 15 LT245C USER Manual Name 2C-104 Pulley 3 pcs 2A-101 Column 2 pcs 2B-102 Extendable column 2 pcs 2B-103 Hex screw M10*30 4 pcs 2B- 104 Flat washer Ø 12 8 pcs 2B-105 Top plate 2 pcs 2B-106 Spring washer Ø 12...
  • Page 16 LT245C USER Manual Name Cross countersunk head screw 2C-201 8 pcs M8*16 2C-202 Rubber lifting pad 120*30mm 4 pcs 2C-203 Lifting tray 4 pcs 2C-204 Swivel nut 4 pcs Complete tray assembly 2C-205 4 sets (2C-201,202,203,204) 2C-216 Lifting arm1 80*80*580mm...
  • Page 17 LT245C USER Manual Name 2C-301 Slider 70*37*37mm 16 pcs 2C-313 Protection rubber pad 2 pcs 2C-303 Hex socket head cap screw M8 4 pcs 2C-304 Carriage 2 pcs 2C-305 Key ring Ø 4*60 4 pcs 2C-306 Locking shaft Ø 22...
  • Page 18 LT245C USER Manual Name 2C-1001 Motor 1 pc 2C-702 Overflow valve 1 pc 2C-703 Plug 1 pc 2C-704 Plastic oil tank 1 pc 2C-705 Oil absorbing pipe 1 pc 2C-706 Oil back pipe 1 pc 2C-707 Lowering handle 1 pc...
  • Page 19 LT245C USER Manual Name 2B-117 Steel cable 2 pcs Name 2A-601 Short oil hose 1 pc 2A-602 Long oil hose 1 pc...
  • Page 20: Warranty

    For any problem met during the operation, please call +86-755-89589810. If the device needs to be repaired, please send it back to SmartSafe, and attach the Warranty Card, Product Qualification Certificate, Purchase Invoice and problem description. SmartSafe will maintain and repair the device for free when it is within warranty period.

Table of Contents