2.Make sure the foot pedal, when pressed, touches the same flat surface on which the toilet is installed. 3.Ensure that the water supply pressure is no m ore than 0.4 Mpa. 4.Water hotter than 40 degrees is forbidden. Product List BFTLPT-2000 Toilet Water pipe Manual...
Page 4
ASSEMBLY INSTRUCTIONS Toilet lid Toilet seat ½inch water inlet T-type flush nozzle Φ10mm mounting hole Drain valve Floor mounting kit Toilet base Toilet pedal Water pipe T-bolt and Seal ring rubber case Product and mounting dimension Ref. Description Ref. Description 390mm / 15.4"...
ASSEMBLY INSTRUCTIONS Installation 1.To replace an older toilet, turn off the water supply to the toilet. Remove and drain the water supply line. Remove toilet hold-down bolts/screws. Remove the toilet from the floor. Discard the old flange seal and hold-down bolts. Ensure that the center of the floor flange is at least 200 mm/7.9"...
ASSEMBLY INSTRUCTIONS Operation 1.Add water to bowl To add water to the toilet, press the flush pedal partway down. Water flows into the bowl while the flush valve remains closed. If the flush valve moves, release the pedal slightly. Adding water to an empty bowl helps prevent holding tank odors from entering the living space.
4)Press the flush pedal and allow water to completely drain from the water inlet. Leave the water line disconnected until the threat of freezing temperature disappears.5) Thank you for y our reading with great patience! If you have any questions about the installation of Yitahome's Gravity Flush Toilet, just e-mail us at after-sale.cs@hotmail.com...
ASSEMBLY INSTRUCTIONS Main Features Premium user comfort: American-standard full-size damping seat and lid, a large toilet bowl and a seat height of 478mm result in greater homelike performance. Easy to flush: High-gloss toilet bowl with original T-type 3-way flush flow creates a high-speed, full bowl flush.
Need help?
Do you have a question about the BFTLPT-2000 and is the answer not in the manual?
Questions and answers