Page 1
ASSEMBLY INSTRUCTIONS Portable Toilet Product specification: BFTLPT-1004 1. 10L fresh water tank. 2. Piston pump with T-type flush nozzle providing a powerful and full coverage flushing. 3. 15L waste holding tank. 4. Rotating emptying spout and air release valve for a comfortable emptying.
ASSEMBLY INSTRUCTIONS Tip: 1. Please always assemble according to the instruction. 2. Ensure water supply pressure is no more than 0.4Mpa. 3. Hot water more than 40 degrees is forbidden. Product List BFTLPT-1004 Toilet Manual PARTS Toilet lid UCTIONS Toilet...
ASSEMBLY INSTRUCTIONS Caution: ① Place on smooth ground. ② Ensure all latches are locked. ③ Ensure the waste holding tank is assembled correctly and the cap is screwed on correctly. ④ Bearing weight limit is no more than 200 kg. ⑤...
ing spout ASSEMBLY INSTRUCTIONS Clean Operation: ① Open the latch. ② Move away the fresh water tank. ③ Empty the waste holding tank. ④ Replace the fresh water tank. ⑤ Close the latch. Emptying spout Exhaust valve Press the valve to prevent spill Rotating out the spout when before use or to prevent splash you emptying the tank...
Page 5
3. Relax the waste holding tank cap for long �me storage. 4. Avoid strong sunlight and high temperature. Thank you for your reading with great patience! If you have any questions about the installation of Yitahome's Portable Toilet, just e-mail us at yitahome@outlook.com.