Cosatto Get Set Gro Instructions Manual page 12

28-
29-
Softgoods
30-
31-
Checklist:
•
Have you check the compatibility of the child car seat with the
intended vehicle?
•
If applicable, is the air-bag de-activated?
•
Is your child car seat correctly fitted to the vehicle seat?
•
Have you check the safety indicators on ISOFIX arms & ISOFIX
top-tether strap clip?
•
Is your child correctly secure in the child car seat?
•
Is harness adequately tensioned and not twisted?
Tension the vehicle belt (a & b).
IMPORTANT: The position of the vehicle belt buckle can affect the
stability of the child restraint system. In an accident this could
stop the child restraint system from protecting your child as well
as it should. After tightening the vehicle belt, if the buckle lies in
the position marked (X) then try fitting the child restraint system
in another seating position in your vehicle.
Removal is a reversal of this procedure.
Belted with ISOFIX arms only:
Fitting:
Convert the seat unit to forward facing orientation (refer to step
12).
Recline the backrest to position 1 (Refer to step 2) (a).
Position the child car seat on the vehicle seat, forward facing.
Attach the ISOFIX arms to the anchor points (refer to step 13 - 15) (b).
Secure your child with vehicle belt (refer to step 27 - 28) (c).
Removal is a reversal of this procedure.
Removing:
Convert the car seat to booster seat mode (refer to step 23 - 25).
Unfasten the headrest cover poppers (a) and remove the headrest
cover (b).
Open the seat cover flap (a).
Release the fabrics around the top-tether strap guides (b) and
unfasten the seat cover poppers (c) then remove the seat cover
(d).
Reverse the procedures above to refit the softgoods.
8