GE Profile DPSE810EG0WT Owner's Manual page 15

Before you call for service...
Problem Possible Causes What To Do
Clothes take too long Improper sorting
todr u
Large loads of heavy fabrics
(like beach towels)
Controls improperly set
Lint filter is full
Improper or obstructed
ducting
• Separate heavy items from lightweight items (generally,
a well-sorted washer load is a well-sorted dryer load).
• Large,heavy fabrics contain more moisture and take
longer to dry. Separate large, heavy fabrics into smaller
loads to speed drying time.
• Match control settings to the load you are drying.
• Clean lint filter before every load.
• Check installation instructions for proper
ducting/venting.
• Make sure ducting is clean, free of kinks and
unobstructed.
• Check to seeif outside wall damper operates easily.
• Check the Installation Instructions to make sure the
dryer venting is correct.
Blownfuses or tripped • Replacefuses or reset circuit breakers.Sincemost dryers
circuit breaker use 2 fuses/breakers, make sure both are operating.
Overloading/combining loads • Do not put more than one washer load in the dryer at
a time.
Underloading • If you are drying only one or two items, add a few items
to ensure proper tumbling.
Clothes are wrinkled Overdrging • Select a shorter drying time.
• Removeitems while they still hold a slight amount of
moisture. Select a LESSDRYor DAMPDRY setting.
Letting items sit in dryer • Removeitems when cgcle ends and fold or hang
after cycle ends immediately.
Overloading • Separate large loads into smaller ones.
Clothes shrink Some fabrics will naturally shrink • To avoid shrinkage, follow garment care labels exactly.
when washed. Others can be • Some items mag be pressed back into shape after drying.
safely washed, but will shrink
in the dryer • If you are concerned about shrinkage in a particular
item, do not machine wash or tumble dry it.
14